Dynalink WLG25PCI Посібник з швидкого налаштування - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Адаптер Dynalink WLG25PCI. Dynalink WLG25PCI 10 сторінок. Wlan pci adaptor
Також для Dynalink WLG25PCI: Посібник користувача (16 сторінок)

Друкувати сторінку

WLAN PCI Adaptor Quick Set-up Guide

Highlight the access point you wish to joint, click Connect.

If the network uses encryption,

you will be asked to enter the

key. Obtain the key from the

system administrator and enter

into the WPA Preshared Key box.

Click OK.

The wireless adaptor will attempt

to connect. If authentication has

been successful, the Site Survey

page shows Connected status,

and the Link Status page starts reporting the link quality:

This confirms your computer has joined the wireless network.

If you wish, the parameters you entered can be saved to a profile. Click the Add

to Profile button in the Site Survey page to store the parameters. Multiple profiles

can be saved and modified at any time. If you want to join a network whose

connection profile is already stored, select it from the Profile page and Activate.

The wireless adaptor will automatically connect using the stored parameters.

ZERO CONFIGURATION UTILITY – WINDOWS XP ONLY

3.3

If you prefer using the Windows

Zero Configuration Utility, check

that the Vendor's utility is

disabled. Right click the

Vendor's utility icon on taskbar, select Use RaConfig as Configuration Utility.