Dynalink A 3605 Інструкція з експлуатації Посібник з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Подовжувач Dynalink A 3605. Dynalink A 3605 17 сторінок. Hdmi 4k wireless sender system
Друкувати сторінкуA 3605 HDMI 4K Wireless Sender System
Operation & Pairing
A standard wireless HDMI extender kit includes one transmitter and one
receiver, which are paired before shipment. Normally you don't need to
pair them again.
However, if you buy additional receiver, you need to follow the instruction
below to pair the new receiver with the transmitter.
1. Power on the transmitter.
2. Power on the receiver till it's on the main menu.
3. Press the receiver's reset button and hold for 5 seconds till the LED is
flashing fast.
4. Wait around 30 seconds, the transmitter and receiver will paired
automatically.
Connecting the transmitter
The transmitter sends the HD video signal wirelessly to the receiver in
another room . Therefore, place the transmitter near your HDMI source
(for example: set top box, Blu-ray player, Media Player, Media Center PC/
laptop).
1. Connect the power adapter to the connector marked "5V" and insert
the plug into the wall socket.
2. Use a HDMI cable to connect the HDMI source to the HDMI port
marked "HDMI IN" on the TX.
3. Optional: To continue watching TV in this room as well, use a HDMI
cable (not supplied) to connect a TV to the HDMI port marked
"HDMI OUT".
Transmitter LED guide:
Red: System is booting up.
Blue: Connected.
Purple: No video input.
6.