Gainbridge GT3012 Посібник з монтажу - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з монтажу для GPS Gainbridge GT3012. Gainbridge GT3012 12 сторінок. Magnetic &portable gps tracker

Друкувати сторінку

4.2 SIM Card Installations and Removal

b. Open waterproof rubber

c. Insert SIM card into the SIM slot, metal face up, clipped corner to the right.

d. Green light is flashing for couple second and turn to on always on

e. Call the device SIM number and it is supposed to get through without answer.

f. Ensure the waterproof rubber is closed after SIM installation

5. What to do to make the device be online

5.1. Get a GSM card, only 2G GSM card can work with this tracker.

5.2. Check with the service provider and get the APN for the SIM card.

5.3. Set the APN to the device.

Send SMS to the SIM card in the tracker: *apn*xxx* ("*"is included)

5.4. Register the master controller.

Send SMS to the SIM card in the tracker: *master*123456*+1XXXXXXXXXXXX*

Note: +1 is the country code, xxxxxxxxx is the phone no. which will receive alert or message

from the tracker, you can replace it with your own mobile phone no.

5.5. Set the uploading interval.(refer to part 9)

Send SMS: *routetrack*99*

Or SMS: *check*0-99*

Or SMS: *checkm*10-999*

5.6. Log in the tracking web: gps.gaintrace.com with user name and password.

The user name is the registered phone no.

For example:

If your master controller no. is +55 12345678910

Then your login account would be: 005512345678910

Default Password: 123456

6. Operation Commands Guide

6.1 Set APN

(VERY IMPORTANT AND MUST BE DONE 1ST)

For the device to send data to the server, this command MUST be enabled.

SMS:

*apn*AXXX*BXXX*CXXX*

refers to user name, CXXX refers to password.

If there is no user name and password required, send as

If there is user name but no password required, send as

APN information can be checked on local telecom website.

You will receive the following text: " APN is set to XXX. User name: XX. Password: XX"

6.2 Registering the "Master" Controller

SMS to the device:

phone number is +1XXXXXXXXXXXX. +1 refers to the country code. XXXXXXXXXXXX is the

cellphone number. Please make sure country code is included, and digit 0 is not needed before cell

phone number)

Device Response: " Cell Phone # xxxxxxxxxx is set to master controller, the password is 123456."

(The device has a default password of "123456" to initially program in your PDA/Phone.

NOTE: The device will ONLY listen and respond to instructions from this number unless you choose

to turn on the multi controller function and open the device to any cell phone number see NO.13 for

This command sets the telecom Access Point Name. BXXX

*master*123456*+1XXXXXXXXXXXX*

*apn*AXXX*

*apn*AXXX* BXXX

, (For instance, master controller

6 / 12