Dynalite DPMI940-DALI Посібник з монтажу - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з монтажу для Обладнання для запису Dynalite DPMI940-DALI. Dynalite DPMI940-DALI 2 сторінки. Dali auxiliary input interface
Друкувати сторінкуInstallation steps
Power down & Isolate DALI bus prior to wiring the device
Switch plate mounting
1.
Select a dry location for device and ensure that there is enough physical room for device and switches
without applying excessive pressure on wall plate.
2.
If mounting behind switch plate ensure that all wires are not damaged and device is isolated from any
mains wires that may be present.
3.
Connect grey input wires into each dry contact switch and use the purple common wire to loop into the
other side of switches contacts. Dry contact input wires must not exceed 1 meter.
4.
Connect DALI network to orange wires. DALI is a non polarised communication protocol.
5.
Ensure that after mounting none of the bare wires are exposed.
rd
3
party integration
1. Select a dry location for device and ensure there is enough physical room for the device if mounted
inside a housing
2. Connect grey input wires into the volt free dry contact out of the 3
switch) and use purple common wire as a loop into the other side of volt free outputs.
3. Ensure that the whole installation is touch safe.
product specifications
DALI Serial Port:
Dry Contact Inputs:
User interface controls
Internal Controls:
Operating Environment:
DALI Power Consumption:
Compliance:
Construction:
Body Dimensions:
Fly leads length
Weight:
Dynalite manufactured by WMGD Pty Ltd (ABN 33 097 246 921) Unit 6, 691 Gardeners Road Mascot NSW 2020 Australia Tel: +61 2 8338 9899 Fax: +61 2 8338 9333
mounting details
1 x DALI port 2 x Fly leads (2 x Orange wires) Polarity insensitive.
4 x Dry contact inputs (Inputs = 4 x Grey wires Common = 1 x purple wire)
User service switch for DALI address sign on.
Programmable Logic Controller
0º to 50ºC ambient temperature, 0% to 95% RH non condensing
9mA Max @ 9.5 – 22.5 VDC
CE, C-Tick
ABS Housing
H 17.9mm x W 34.4mm x D 53.2mm
165mm
50 grams
DPMI940-DALI Instruction Manual Rev B.Doc Specifications subject to change without notice
E-Mail:
rd
part device (BMS, security, reed
Web: Philips.com/dynalite