Gainlab Audio GLA-TC2 Посібник - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник для Обладнання для запису Gainlab Audio GLA-TC2. Gainlab Audio GLA-TC2 13 сторінок.
Також для Gainlab Audio GLA-TC2: Посібник з калібрування (18 сторінок)
Друкувати сторінку
METERS
MECHANICAL RESET FOR THE METERS
With the device turned off, use a straight slotted screwdriver to turn the mechanical
reset screw until the pointer is in the center of the 20-point value on the lower scale.
METER MODE SWITCH
Specifies whether the instrument clusters show the degree of compression
or the output signal level. Set the mode switch to the up position to
check the amount of compression. Set the mode switch to the down
position to check the output signal level.
DUAL CHANNEL OPERATION
DICTATOR DUAL MONO VARI-μ
The meters provide information - optionally - on
the magnitude of the signal level leaving the unit
or the degree of interference from the
compressor.
Being a dual mono compressor, the right-hand
VU meter shows the levels for the B channel,
while the left-hand VU meter shows the levels for
the A channel. Meter units express values in
Volume Units (VU).
The GLA-TC2 Dictator Dual mono is a dynamics controller
designed for dual channel operation. Thus, the channels
marked A and B can be parameterized completely
independently from each other. All parameters are stepped,
the two channels can be set equally, so they are still
suitable for processing stereo material.
4