Gainlab Audio BISHOP Посібник із швидкого старту - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Підсилювач Gainlab Audio BISHOP. Gainlab Audio BISHOP 10 сторінок.
Також для Gainlab Audio BISHOP: Посібник (15 сторінок)
Друкувати сторінку
NOTE: GROUND THE RECEIVING SIDE
Nt
If the Bishop has a microphone connected to it with an external power
supply, there is a possibility that a so-called
between the Bishop's power supply and the external microphone's
power supply, which can have an
noise ratio.
In such a case, the
comes into play. Therefore, on the sending side, which is the side of the
microphone's power supply, the
cable should be used that breaks the grounding on the microphone's
power supply side.
adapter connector
SIGNAL SOURCE SELECTION
So
The signal source selector can
be found to the left of the Gain
Mode selector switch. In
center
position, which is the
default setting, the Bishop
expects a
microphone-level
balanced signal at its input.
the
lower
position, it anticipates
a
symmetrical or asymmetrical
line-level signal
for the preamp.
The
upper
position, on the other
hand, is intended for
input.
The instrument input is
undesirable impact on the signal-to-
"always ground the receiving side"
ground lift switch must be
Additionally, there is the option to use a
as well.
its
In
instrument
ground loop
may form
used, or a
ground lift
rule