Dynalite DTP170 Посібник з монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з монтажу для Сенсорний екран Dynalite DTP170. Dynalite DTP170 6 сторінок. Colour touch screen

dimensions

DTP170 with Wallbox Fitted

DTP170 without Wallbox

installation

Selecting an Installation Location

Remember the display height should be equal to, or slightly below, the eye level of all users. Avoid

a location in which bright light is present, either directly in front of, or behind, users.

Installing the Product

The DTP170 Touch Screen is designed to be flush-mounted, with or without a wallbox. If using a

wallbox, separate the wallbox from the Touch Screen and make sure no dust or debris enters the

Touch Screen during installation. Knock out a cable entry point on the wallbox, then prepare a

hole:

140mm high x 218mm wide x 71mm deep.

The wallbox can then be fixed in place using an appropriate method.

Power Supply

This product consumes up to 600mA from the DyNet network. Ensure that appropriate DyNet DC

supply is available to operate this product and any other DC supply consuming peripherals that

may be present on the bus.

DTP170 Installation Manual Rev C.docx