Automation Networks Highway Plus ANC-100e Посібник користувача - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник користувача для Адаптер Automation Networks Highway Plus ANC-100e. Automation Networks Highway Plus ANC-100e 19 сторінок. Ethernet to data adapter

Друкувати сторінку

1. Configuration and Interface

ANC-100e

Ethernet to DH+ Adapter

Language

Language tab offers English or Spanish language for the web interface. Changing the current web

interface language does not require a device reboot.

Reset to Default Factory Settings:

To reset the device to factory default settings:

1. Power on the device and wait approximately 5 seconds

2. Use a paper clip or similar to press and hold the reset button located under the little hole

below the "DH+" LED indicator light

3. Release the button when the tree LEDs light up

4. Device will reboot restoring its factory default settings

IMPORTANT: Factory default settings for the device are:

©Automation Networks & Solutions LLC. 2016

IP address

Network Mask

Default Gateway

DHCP

DH+ node

DH+ speed

Interface Language

Username

Password

192.168.0.230

255.255.255.0

192.168.0.1

Off

AUTO

English

admin

password

User Manual 17