Hide-A-Hose Vacuum Cleaner Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Пилосос Hide-A-Hose Vacuum Cleaner. Hide-A-Hose Vacuum Cleaner 3 сторінки. Beam central vacuum systems vacuum cleaner user manual

Друкувати сторінку

RF handle battery replacement

Open the battery casement.

Locate the battery

casement just below the

metallic nozzle at the front

of the RF handle (the lid of

the battery casement can

be identified by a white

outlined battery icon).

Insert a small flat

head screwdriver into

the slot at the base of

the battery casement

lid and gently pry

upward.

Reprogram the handle

Depress the recessed button on top of the

receiver with a ball point pen. While the

button on the receiver is depressed (A), push

the handle switch to the "on" position for 1

second (B). (Holding the switch on for more

than 1 second will erase the program of

additional handles.)

If the motor still will not turn on the receiver

may need to be replaced.

Pull out the battery

casement.

Once the battery lid has

been raised, using thumb

and index finger, pull the

casement straight up until

the entire battery is visible.

Vacuum power Unit won't turn on

Check main home breaker panel to ensure

the Vacuum Power Unit Breaker is on. Check

Power Unit Reset Button. Check the PU plug

with another electrical component to ensure

it is operating properly. Check that the

Power Unit is plugged in.

Check all connections between the RF

Receiver, RF power supply, and the Power

Unit.

Press the handle switch to the "on" position

and check to see if the LED light on the

receiver flashes. If the LED light does not

flash the handle is probably not transmitting.

See the section

on changing

the battery

in the

handle.

If the LED

light flashes

but the

motor will

not turn on,

reprogram

the handle.

TROUBLEShOOTING

Replace the battery

Replace the battery with

a size 23A 12 volt alkaline

battery. Using thumb,

carefully push the battery

casement back into the

handle until it clicks.

When you replace the

battery, you may have to

reprogram the

handle.