Gainsborough K543 Посібник - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник для Відкритий фонтан Gainsborough K543. Gainsborough K543 3 сторінки. Solar cascading water feature

Solar Cascading Water Feature

Please read and retain these instructions for future reference

Before using first time

Allow solar panel to charge for at least 8 hours in full sunlight with the ON/OFF switch in the ON position.

The ON/OFF switch is located under the solar panel. Once the batteries are fully charged, set the ON/OFF

switch to ON.

Find an ideal Place for the Solar Light.

Place the solar panel in an area where it will receive direct sunlight for at least 8 hours per day. The number

of hours the pump will work is directly proportional to the hours of sunlight it receives. If the solar panel is

placed in a shaded area, it will not be able to fully charge and its working time will be limited. Do not place

the solar panel near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the

light from coming on, or cause it to turn off automatically

To easily insert stakes into the ground, it is recommended to wet the ground first. To avoid damaging garden

stakes when inserting into the ground, select a spot in soft, rock-free soil. Insert the base of the stake first

then gently insert the rest of the stake into the base. DO NOT push directly against the solar cell or the

ornament housing containing the actual LED light.

INSTALLATION:

1. Attach the pump to the solar panel before use, plug the hose into the outlet of the pump. Make sure the

water level covers the pump.

2. Plug the power line of the pump into the plug of the solar panel, and then fasten.

3. Position the solar panel in full sun to optimally run the pump, the backup battery will be charged from

the solar panel during normal operation and automatically run the pump without direct sunshine.

4. If required the pump can be run by the battery in times of low sunlight. Turn on the switch located at the

back of the solar panel, if the battery is fully charged the pump will start to work immediately.

CHARGING AND OPERATION

Turn the switch, which is located under the solar panel, to "ON" position and the

battery will work automatically. Charge the solar product by placing it under direct

sunlight for at least 8 hours. Recommend longer charging time for the first use. If the

switch is "OFF" the battery will not work, solar panel ensures the pump works

directly.

The light will work automatically.

HOW TO USE:

The pump function will work best when fully charged under direct sunlight. When

there is no sun, the built-in batteries will power the fountain water and light for a minimum of a few hours.

Care and Maintenance Recommendations

•

Clean solar panel with a soft sponge every couple of weeks.

•

Make sure all connectors are still tight and no water getting in.

•

Keep the water clean during the summer keep topping up every 3 or 4 days with clean water.

Instructions for Use

K543

v001: 08/11/21