Activejet 5901443111467 Посібник з експлуатації та гарантія - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з експлуатації та гарантія для Вентилятор Activejet 5901443111467. Activejet 5901443111467 16 сторінок.
Друкувати сторінку
GB
Stand fan Activejet Regular WSR-40BP / WSR-40CP
NOTE:
Before using the fan, read the Instruction Manual. We recommend that you keep this manual for future reference.
While the fan is in operation, it is advisable to follow the basic safety rules to avoid a fire, electric shock and mechanical damage to the body.
Observing the instructions and recommendations contained in the Instruction Manual extends the device's service life.
SAFETY RULES:
1. Do not attempt to repair the device yourself.
2. Keep the device work area in order.
3. Keep the device away from moisture and water, explosive and flammable substances and particles. Failure to follow these rules may result
in a fire or electric shock. Excessive dusting of the device may lead to overheating of the motor and permanent damage to the fan.
4. It is forbidden to use wires with the plug that is not original or any adapters.
5. Take care of the power cord; do not use the cord to move the device, pull it or pull the plug from the wall. Protect the cable from heat,
mechanical damage, oil.
6. Do not put your fingers or devices in the air outlet/inlet grille. Take care that long hair is not screwed into the propeller of the device in use.
7. The device is not intended for people with limited physical, sensory or mental abilities. Children under the age of 8 and people
with restrictions may use the device only under the supervision of a person responsible for their safety.
8. Do not cover the device, for example, with clothing.
9. Make sure that the power supply complies with the voltage specified for the device (220-240V ~ / 50-60 Hz).
10. Installation, disassembly, cleaning and maintenance of the fan may take place only after removing the plug from the socket.
11. Do not leave the switched on device unattended.
12. The device is intended for use indoors, in clean and dust free rooms. The fan should be placed on a hard, flat surface at a distance of 1m from
all objects, such as radiators, other electrical appliances, furniture and curtains.
TECHNICAL DATA:
Model: WSR-40BP, WSR-40CP
Voltage and frequency: 220V-240V, 50Hz-60Hz
Power: 50 W
Weight: ~3.2 kg
ASSEMBLY:
During assembly, use the technical drawing.
After opening the package, make sure that the box contains all the required elements.
1. Cross the base elements (2) and plug the ends with the attached feet.
2. Assemble the telescope by placing the inner telescope tube (3) in the outer one with a larger diameter. Attach the base element (4) using
the provided screws provided to the fan base.
3. Place the masking cap (5) and pull out the upper inner tube (3). Tighten the telescope lock (6).
4. Attach the power package to the engine housing (1) to the top of the telescope (3). Make sure that the drive assembly is properly seated
in the upper part of the telescopic tube and screwed on with the included screw.
5. Remove the mounting nut (8), put the rear protective grille (10) on the motor shaft. Secure the mounting nut (8).
6. Place the fan blade (11) on the motor shaft. Pay special attention to the correct alignment of the sleeve of the fan blade with the shaft pin.
Secure the fan blade with a lock (9).
7. Attach the front grille (12).
8. Connect the front and rear grille with the attached fixing strap. Connect the ends of the strap with the included screw. Make sure all
components are well fitted and the device is stable.
CONNECTION TO THE NETWORK:
After making sure that the power supply is compatible with the voltage specified on the device, connect the device to a properly installed electrical
outlet with a protective bolt.
USE:
Make sure that the fan is placed on a flat and level surface away from other heat sources, at a sufficient distance from curtains and other
lightweight materials that the air rush could pull into the fan.
Stand fan Activejet Regular WSR-40BP / WSR-40CP
1. Use the Swing Switch (13) to set the desired function: no swing or horizontal swing.
2. The fan head is adjustable, it can be directed up and down by slightly raising or pressing the cover of the engine cover to direct the air stream
to the desired direction.
3. The device is controlled by means of buttons on the control panel or using the remote control. In order to use the remote control, you should
supply 2 pcs of AAA batteries (1.5V), which are not included in the package. Control panel and remote control can be used interchangeably,
depending on the user's needs.
4. FAN SPEED SETTINGS AND MARKINGS:
ON/SPEED/OFF – turn on / speed / turn off
Each time you press the button, you will go into the next operating mode of the device:
ON ( turn on ) -> LOW ( low speed ) -> MID ( medium speed ) -> HIGH ( high speed ) -> OFF ( turn off )
5. TIMER SETTINGS:
The timer function allows you to set the planned time of the fan operation. After switching on the device, press the TIMER button ->
the corresponding LED on the display panel will light up. Pressing the TIMER button again will allow you to set the desired operating time
of the device in accordance with the diagram below. It is possible to set the fan operation time from 1h to 7h in hourly intervals.
LED
1
2
1 + 2
Hours
1h
2h
3h
We recommend unplugging the fan from the power supply in the event of a long break in use.
WARRANTY CONDITIONS:
1. Activejet fans are covered by a 24-month warranty. The time covered by the warranty is calculated from the date of purchase of the product.
2. The warranty covers defects caused by factory-based defective materials, improper assembly (factory), manufacturing errors.
3. The warranty does not cover defects resulting from: use contrary to the purpose and recommendations of the Instruction Manual, overloading
the device leading to the damage of the engine or mechanical transmission components, making repairs on one's own or by unauthorized
persons, making construction changes, physical and chemical damage caused by external factors and damage caused by improper assembly
as well as mechanical damage.
4. The warranty does not cover parts subject to natural wear during operation: thermal fuses, electrostatic brushes, V-belts, tool holders,
accumulators, working tips of power tools.
5. The nameplate of the device should be legible. The returned/claimed product should be carefully protected against damage in transit.
As far as possible, provide the product in the original packaging.
6. In order to make use of the warranty, you should report to the point of purchase along with the proof of purchase (receipt, invoice).
7. The warranty is carried out by the sole distributor and owner of the brand: Action SA, Zamienie, ul. Dawidowska 10, 05-500 Piaseczno, Poland.
MEANING OF THE SYMBOL:
A crossed out trash bin symbol means that the device should not be disposed of in normal waste containers.
It is the responsibility of the user to hand over the used equipment to the collection points for the recycling of waste
generated from electrical and electronic equipment.
CE DECLARATION OF CONFORMITY:
The device has been manufactured in accordance with the applicable European standards, including the relevant directives and regulations
in force in the European Union for electrical products. This means that the product complies with the principles of safe use, health
and environmental protection.
4
1+4
2+4
1+2+4
4h
5h
6h
7h
Timer turned off
GB
LED not lit on