89 North PhotoFluor II Посібник із заміни - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник із заміни для Лабораторне обладнання 89 North PhotoFluor II. 89 North PhotoFluor II 8 сторінок. Lamp replacement
Друкувати сторінку
Safety First
The PhotoFluor II family of light sources use a powerful lamp that
produces heat as well as visible and UV light. Proper care must be
taken in the setup and operation to prevent injury.
WARNING:
WARNING:
WARNING:
WARNING:
Rev B
The lamp should only be handled wearing gloves
and suitable eye protection.
When operating, the lamp produces significant
amounts of ultraviolet radiation.
directly at the lamp or at light reflected from the
lamp or the output from the liquid light guide.
Do not expose skin directly to the output of the
liquid light guide.
Use only the recommended bulb replacement.
Never
substitute
manufacturer's bulb.
DON'T BE A FOOL, LET IT COOL. The lamp
produces significant amounts of heat. Always allow
the light source components to cool to ambient
temperature before attempting any adjustments or
replacement of parts.
After 1500 hours of operation, the metal halide lamp
must be replaced to ensure suitable performance
and safety. The light source will alert the user at
1500 hours that the lamp is due for replacement.
At 1600 hours, the engine will cease operation as
the bulb is no longer safe to use.
Used lamps should not be discarded in the
conventional waste stream.
metals that must be handled as potentially toxic.
Please consult the following web address for current
information: www.lamprecycle.org.
the
bulb
The lamps contain
Never look
with
another
2