Hideaway Beds Studio Інструкція з монтажу Посібник з монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Внутрішнє оздоблення приміщень Hideaway Beds Studio. Hideaway Beds Studio 7 сторінок. Universal table/desk for all sizes of panel wall beds

Друкувати сторінку

Familiarize yourself with all of the components in the Studio Desk/Table mechanism cartons, as well

as thoroughly study this manual so you may plan the steps required to complete this project.

Study all illustrations and plan drawings. Make sure that the space available in the room is adequate

for the specified dimensions in both the open and closed positions.

NOTE:

Cabinet Panels may be constructed of Ply Core or Particle Board.

STEP 1: Prepare Desk Top and Riser (Wood or Laminate)

Determine the length of your desk.

NOTES:

• All Desks are 22" in Depth (560mm).

• All Risers are 8.5" in Height (216mm).

• Length of Desk and Riser assembly is always 1.5" less than the measured distance

Edge-band the two long edges of both the Desk and Riser.

NOTE:

If the Panel Bed is slightly too heavy too open and close without the Studio Desk/Table

mounted, you should add one Spring to the right and to the left to assist in balance. An

odd number of Springs right and left may be used to get balance

STEP 2: Assemble Desk/Table with Upper Brackets.

Assemble the Desk/Table with the Upper Brackets as shown in Drawing #1.

Screw the Desk Top first to the Left and Right Brackets. This provides a seat for the Riser.

Attach the Riser to the Brackets. Be sure of alignment and then screw the Desk and Riser together

from the bottom side with the #8x1.5" (40mm) Screws provided.

Mount the Hinges to the Riser as shown in Drawing #2.

Project Start-Up

Steps to Complete the Project

between the vertical Cabinet side walls.

E.g. The ALPHA bed Queen cabinet is 64" (1625mm) between the vertical

cabinet side walls therefore the Desk and Riser will be 62.5" (1587mm) long.