DynaMetric TLP-102 Інструкція

Переглянути онлайн або завантажити pdf Інструкція для Телефон DynaMetric TLP-102. DynaMetric TLP-102 2 сторінки. Telephone logger patch

DynaMetric

The TLP-102 Telephone Logger Patch adapts most single or multiline phones, analog

or digital, to a tape recorder, sound card, or other audio device. It provides a clear

audio signal containing both sides of the phone conversation. The TLP-102 connects to

the telephone via the modular handset connector. See the diagram and installation

instructions below. Will not record speakerphone.

INSTALLATION INSTRUCTIONS

Unplug the coil cord from the base of the phone and plug it into the modular jack on

the TLP-102.

Plug the cable with the modular connector on the TLP-102 into the phone base

where the coil cord was plugged.

Plug the cable with the 3.5mm plug on the TLP-102 into the tape recorder, or MIC

Input of a sound card or other audio device.

FOR LEGAL USE ONLY

www.DynaMetric.com

717 SOUTH MYRTLE AVENUE • MONROVIA, CALIFORNIA 91016-3422

626-358-2559 • FAX 626-359-5701 • 800-525-6925

Instructions for TLP-102

Telephone Logger Patch

P/N 39041

Page 1 of 2

6-22-04