Celestron 4040 Інструкція з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Мікроскоп Celestron 4040. Celestron 4040 15 сторінок. Celestron 4040 microscope: instruction manual
Друкувати сторінку
Focusing:
Now that the specimen slide is placed directly under the objective lens, use the course focus
knob (12) to focus on the specimen.
Always start with the lowest power (4x objective lens) and switch to higher power by rotating
the objective lens rotator (3). Be cautious not to let the objective lens touch the specimen
slide when changing to higher power.
Use the fine focus knob (10) to change the depth of field on the specimen you are observing.
If you run out of upward travel before reaching sharp focus, you can unscrew the focus travel
safety screw (14) to allow for more upward travel. Once again be careful not to let the
objective lens touch the specimen slide.
Replacing the illuminator lamp:
1. Raise the specimen stage (6) to its highest position by rotating the course focus adjustment
knob (12).
2. Unscrew the black metal illuminator housing (8) and lift it straight up over the lightbulb.
3. Turn the lightbulb counterclockwise while gently pushing down.
4. Replace with a new 20W tungsten bulb.
5. Slide the illuminator housing back over the lightbulb and thread into place.
7