Gait up Physilog 6S Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Медичне обладнання Gait up Physilog 6S. Gait up Physilog 6S 18 сторінок.
Також для Gait up Physilog 6S: Посібник із швидкого старту (6 сторінок)

Друкувати сторінку

5.2. How to update Date and Time of the Physilog 6S

Via computer:

⋅ Create a new text file on the Desktop of your computer or directly on the Physilog® sensor

(on Windows: right click, new>text file, on Mac: open text editor and save file as text file)

⋅ Leave it empty and rename it to TIME (complete name with file extension: TIME.txt)

⋅ Copy-paste the file to the Physilog® if you saved it on the Desktop

⋅ Disconnect the Physilog® from the computer to update the time and date to the hour when

the file has been created

Create a new text file each time you update the date, do not just rename or modify an existing

TIME.txt file (TIME.txt file previously created will update to the date it was created, so in the

past).

The TIME.txt file will disappear from Physilog's memory when disconnecting the Physilog® from

the computer, therefore it is normal to not find it the next time you open the Physilog® on the

computer.

Via mobile application:

Connect the Physilog® to the Android companion application inside the "Remote control" mode.

Start a short measurement from the app, you can stop the measurement as soon as the stop

button is available in the user interface of the mobile application. Then disconnect the sensors

or completely quit the app.

5.3. How to update firmware of Physilog 6S with nRF Connect

The firmware is updated via Bluetooth. Therefore, install the nRF application on a mobile or

tablet (Android or iOS) and follow the steps below. It may be necessary to install a file manager

application in addition to the nRF app to be able to select the firmware file from a chosen

location of file storage on your device.

Android

⋅ Install the "nRF Connect for Mobile" app on the Android device

⋅ Download the latest firmware version from the email to the Android

device

⋅ Open the nRF Connect app and enable all necessary permissions

(Bluetooth and Position, see pictures below)

⋅ Go to Scanner tab and scan for surrounding Physilog (gently shake the

Physilog 6S to enter detection mode)

⋅ Select connect of one Physilog 6S sensor in the list

⋅ Plug the selected Physilog to a power source to be sure to have enough battery to perform

the update

Physilog 6S user manual v1.0.0 Date: 08.01.2021