Dynamic DX-ECU Посібник з монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з монтажу для Блок управління Dynamic DX-ECU. Dynamic DX-ECU 15 сторінок. Environmental control unit

GBK64227 - Issue 3 : August 1998

RODUCT

ESCRIPTION

A single ECU, being basically an adaptor module, allows from one to eight input

devices to be controlled, and with a possibility of two ECU modules being

incorporated into a single DX system, a total of 16 input devices could be utilized.

Input devices are connected to the ECU by way of a DB9 plug and are controlled,

via the SCR, by any DX compatible input device. A 2-pin Molex socket is used to

select between ECU1 and ECU2 (see pages 7 & 8 for connections).

Note : An ECU can only be used in conjunction with an SCR.