Automationdirect.com Productivity 2000 P2-32ND3-1 Посібник - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник для Блок управління Automationdirect.com Productivity 2000 P2-32ND3-1. Automationdirect.com Productivity 2000 P2-32ND3-1 4 сторінки. Dc input
WARNING:
To minimize the risk of potential safety problems, you
should follow all applicable local and national codes that regulate
the installation and operation of your equipment. These codes vary
from area to area and it is your responsibility to determine which
codes should be followed, and to verify that the equipment, instal-
lation, and operation are in compliance with the latest revision of
these codes.
Equipment damage or serious injury to personnel can result
from the failure to follow all applicable codes and standards. We
do not guarantee the products described in this publication are
suitable for your particular application, nor do we assume any
responsibility for your product design, installation, or operation.
If you have any questions concerning the installation or opera-
tion of this equipment, or if you need additional information, please
call Technical Support at 770-844-4200.
This publication is based on information that was available at
the time it was printed. At AutomationDirect.com® we constantly
strive to improve our products and services, so we reserve the right
to make changes to the products and/or publications at any time
without notice and without any obligation. This publication may also
discuss features that may not be available in certain revisions of
the product.
Connector Specifications
Connector Type IDC style Header with latch, Omron XG4A-4034
Number of Pins
40
Pitch
0.1 in (2.54 mm)
4
www.productivity2000.com
General Specifications
Operating Temperature
0° to 60°C (32° to 140°F),
Storage Temperature
-20° to 70°C (-4° to 158°F)
Humidity
5 to 95% (non-condensing)
Environmental Air
No corrosive gases permitted
Vibration
IEC60068-2-6 (Test Fc)
Shock
IEC60068-2-27 (Test Ea)
Field to Logic Side Isolation
1500VAC applied for 1 second
Insulation Resistance
>10MΩ @ 500VDC
Heat Dissipation
3W
Enclosure Type
Open Equipment
Module Keying to Backplane
Electronic
Module Location
Any I/O slot in a Productivity2000 System.
Use ZIPLink Wiring System only. See "Wiring
Field Wiring
Options" on page 3.
See the "EU Directive" topic in the Productivity
EU Directive
Suite Help File. Information can also be obtained
at: www.productivity2000.com
Weight
104g (3.7 oz)
UL 61010-1 and UL 61010-2-201 File E139594,
Canada and USA
Agency Approvals
CE (EN 61131-2 EMC, EN 61010-1 and EN 61010-
2-201 Safety)*
*Meets EMC and Safety requirements. See the D.O.C. for details.
Document Name
P2-32ND3-1-DS
Copyright 2017, AutomationDirect.com Incorporated/All Rights Reserved Worldwide
Tech Support 770-844-4200
Edition/Revision
Date
2nd Edition
9/10/2019