Airdog X3 Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Очищувач повітря Airdog X3. Airdog X3 8 сторінок.
Друкувати сторінку
Installation Guide
1. Take the collecting plates out of the foam box (if any styrofoam packaging pieces are on the plates,
blow or brush them out before installing the collecting plates);
2. Use the pull handle to open the back shroud (Pic 1);
3. Insert the collecting plates in the orientation described on the label (Pic 2);
4. Close the back shroud and place the air purifier in an open location to achieve the best cleaning effects.
Pic 1
Pic 3
Pic 2
Power Supply
WiFi Indicator
Detector
Off: no connection
Used to detect if there
Quick Blink: start to connect
are people around, don't
Slow Blink: connecting now
press it.
On: connected successfully
Child Lock
Indicator On:
Child Lock function on.
Cannot operate on panel.
Long press operation button to
cancel, or cancel it by APP.
Operation Instruction
Sleeping Mode Indicator
Shows " ... " on Sleeping mode, all other indicators are
off, running on low speed.
Wind Speed Indicator
Shows L1 to L4 to indicate fan speeds of Low (L1),
Middle (L2), High (L3) or Turbo (L4).
Auto Mode Indicator
1. Adjusts wind speed according to the AQI sensor.
2.Runs on Sleeping mode at night automatically.
When people pass by, the AQI indicator will be on
as a night light.
( * For some models.)
Power Indicator
Indicator lights up when the power is on.
Indicator light is off when the power is off.
Operation Button
1. A short press turns the power ON.
2. A long press (over 3 seconds) turns the power OFF.
3. When power is ON, each short press cycles through
Auto-mode (default), Low speed, Middle speed, High
speed, Turbo speed, and Sleep mode. Check indicator
lights to understand each operation mode.
4. Hold a long press (5 - 10 seconds) until air purifier
turns ON, WiFi indicator blinks quickly, and WiFi
connection starts.