dB Technologies ES503 Посібник користувача "Швидкий старт - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача "Швидкий старт для Стереосистема dB Technologies ES503. dB Technologies ES503 4 сторінки. Tri-amp stereo system
Також для dB Technologies ES503: Посібник користувача (19 сторінок)
Друкувати сторінку
Thank you for choosing a dB Technologies Product!
ES503 is a portable 3-amped stereo sound system composed by two passive tops and one 12" subwoofer. The sub hosts
a 1000W power amp module with auto-range PSU and a 3-channels mixer with Bluetooth® connection. A powerful DSP
– controlled through an advanced user-interface with an OLED display – manages both the coverage of the entire
system and all functions of the mixer, making the ES503 a real gem in terms of sound performance and versatility.
1) Unpacking:
The box contains:
N°1 ES 503 Top A Satellite
N°1 ES 503 Top B Satellite
N°1 ES 503 Sub
N°1 Speakon Cable
N°1 Power Cable
N°1 Telescopic M20 Pole
2) Easy Assembly:
The 3-piece system is light enough to be carried in a
single trip and can be configured in 3 different modes:
. Mono Mode
.Stereo Mode
Option 1: Mono column mode, 1x stand pole
The two satellites are connected top-on-top and are
placed on the subwoofer through the supplied D25mm
pole. The system is used in mono mode so all inputs are
routed to both outputs in mono.
Option 2: Stereo mode, 2x tripods or 1x stand pole
and 1x tripod
This implies the use of two tripods and two optional
Speakon-Speakon cables to connect the subwoofer to
the tops placed on tripods. The system is in stereo: The
Mic/Instrument input is assigned to both channels;
CH1/LINE L (and Bluetooth
CH2/LINE R (and Bluetooth
The user can adjust pan, volumes and EQ and can also
set up a second mix with different levels for the AUX /
MIX output.
Option 3: DOUBLE COLUMN mode, 2x ES 503 in single
column mode
Two ES 503 systems in single column mode: one system
becomes the master for the other, feeding the signal
thanks to the integrated balanced output channel.
www.dbtechnologies.com
Double Column mode
®
L) is assigned to Output L;
®
R) is assigned to Output R.
In this way, both system are driven by the master's on-
board mixer and any setup is guided through the
master's OLED display.
3) Connections and Oled Display
The ES503 Subwoofers are equipped with an intuitive
OLED display.
1
2
4
1 – Peak led.
2 – OLED Display.
3 – Rotary Encoder with switch.
4 – Mic/Instrument input.
5 – CH1/2 Line input.
6 – Aux/Mix output.
7 – Usb port (only for service).
2
3
1
1 On/Off Switch.
2 Mains Fuse.
3 VDE Mains Input.
4 Right speakon output – To TopB in Stereo Mode.
5 Left speakon output - To TopA in mono and double
column mode.
Use only 503 cables!
In Mono mode and Double Column mode connect ONLY the
Left/Mono speakon output to the TOP A
3
5
6
7
4
5
Rev 1.2 cod. 420120227Q