Gakken Stirling engine Інструкція зі збирання та експлуатації - Сторінка 6

Переглянути онлайн або завантажити pdf Інструкція зі збирання та експлуатації для Іграшка Gakken Stirling engine. Gakken Stirling engine 12 сторінок.

Друкувати сторінку
4

Assembling the Lever Part

PARTS
Parts to be used
D
※ There may be more screws, washers, nuts
 and bushes than actually used for spare.
D1
D2
control lever
Two 7mm
Two 8mm
Two 6mm
Two 9mm
across washers
across washers
large nuts
springs
10
Figure ー
10
Attach the propeller lever to the control lever.
Attach the D2
propeller lever to the
D1 control lever.
11
Figure ー
Attach the motor to
the screw at the D1
2 is engraved
control lever.
on the back.
Full-scale
※Check the size with this.
washer
washer
(7mm in diameter)
(8mm in diameter)
D1
control lever
spacer
nut
(9mm in diameter)
(large 6mm)
11
Attach the motor.
bush (7mm)
spring (9mm)
cross section of the control
How to use the
lever and the motor
wrench here
washer
Put it on from the
(7mm in diameter)
top vertically and
(large 6mm)
spring
turn little by little.
(9mm)
washer
(8mm in diameter)
spacer
(9mm in diameter)
 
D3
propeller lever
motor
Two 7mm
One 9mm
D4
gear
bushes
across spacer
nut (large 6mm)
washer (7mm in diameter)
cross section of the control
spring (9mm)
lever and the propeller lever
washer (8mm in diameter)
nut (large 6mm)
spring
washer
D2
(9mm)
(7mm in diameter)
propeller lever
D2
bush (7mm)
washer
(8mm in diameter)
nut (large 6mm)
washer (7mm in diameter)
spring (9mm)
washer
(8mm in diameter)
3 is engraved
on the back.
nut
bush
(7mm)
spacer
(9mm in diameter)
D3
2 is engraved on
the back.
1 is engraved
D1
on the back.
bush
(7mm)
D1
control lever
10
12
Figure ー
Push the D4 gear on
the motor assembled
at Figure ー  .
11
5

Assembling the Piston Part

Parts to be used
E1
glass cylinder
D1
E2
radiator
bush
(7mm)
E8
propeller
13
Figure ー
Put E1 glass cylinder
in the E2 radiator.
(Put in the glass
cylinder as deep as
D3
possible.)
motor
Warning ★ Fire is used for the experiment. Use great caution to avoid
a burn and fire. Do not let a 15 or less-year-old child experiment alone.
12
Attach the gear
to the motor.
D2
propeller lever
D3  
motor
D1
control lever
PARTS
E
※ There may be more screws, washers, nuts
 and bushes than actually used for spare.
Two 7mm
washers
E7
displacer
E3
displacer holder
E4
main piston
13
Assemble the glass cylinder.
cross section
of the glass cylinder
E1
glass cylinder
E2
E1
11
D4
gear
 
Four 5mm
Two 6mm screws
small nuts
※Check the length
 of screws with
 this diagram.
E5
E6
connecting rod
displacer adjuster
Insert deep enough
until this part is caught
in the radiator.
E2
radiator