GALA mitta Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Ванни GALA mitta. GALA mitta 16 сторінок. Hydromassage bathtubs
Також для GALA mitta: Посібник з монтажу (12 сторінок), Посібник з монтажу (12 сторінок), Посібник користувача (16 сторінок), Інструкція з монтажу Посібник з монтажу (12 сторінок)

BOTTOM HIDROMASAJE JET

They inject water through the

multiple outlets on the bottom of

the bathtub ( Fig.4).

The installation must have been carried out by a qualified technical service. Please follow the

suggestions included in both the Installation Manual and the Assembly Instructions, which are enclosed

with the bathtub.

The bathtub should be connected to 230 V and the household's installation must have a 30 mA differential

switch and an appropriate magnetothermal switch suited to the model.

The metal elements of the bathtub must be connected equipotentially in accordance with the regulations

applying in each country.

Before a hydromassage.

• In order for the bath water to circulate through the hydromassage circuit, ensure that the uppermost jets

are covered with water.

• Special hydromassage essences or soaps must be used. Otherwise a great quantity of foam may be

generated.

Process.

• Fill the bathtub with water until the uppermost jet is covered. Select the water temperature according to

your preference and the type of hydromassage bathtub to be taken.

• Get into the water and press the start button (Fig.1). The desired hydromassage type can be selected

with the diverter ( fig 2)

• The proportion of air, together with the water temperature, the duration of the bathtub and the use of oils,

essences or salts, will determine the effect of the hydromassage.

In general, it is recommended that the water stream should not be pointed directly at the body at an angle,

in order to obtain the greatest benefits of the massage.

Hydromassage Baths with start electronic pushbutton

SIDE HIDROMASAJE JETS

The jets can be directed at will, simply by pressing the

centre with your fingertip. Its ball-and-socket joint housing

allows the jet to be directed by finger pressure (Fig.5).

Additionally, the intensity of the water massage can be

regulated by turning the jet outlet. (Fig.6).

Fig.4

SAFETY

OPERATION