Celestron ASTROMASTER 93610 Інструкція з експлуатації

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Аксесуари для фотоапаратів Celestron ASTROMASTER 93610. Celestron ASTROMASTER 93610 12 сторінок.

Друкувати сторінку

English

stro

Aster

#93610

INSTRUCTION MANUAL

The Celestron AstroMaster Tripod is a stable platform for a

camera, spotting scope, binocular, telescope optical tube,

and other optical instruments. Set up is quick and easy and no

tools are required. The tripod can also be called an

alt-azimuth mount.

eTTINg Up The

RIpOd

1. Remove the tripod from the box (Figure 2-1). The tripod

comes preassembled so that the set up is very easy.

2. Stand the tripod upright and pull the tripod legs apart until

each leg is fully extended and then push down slightly on

the tripod leg brace (Figure 2-2). The very top of the

tripod is called the tripod head.

3. Next, install the tripod accessory tray (Figure 2-3)

onto the tripod leg brace (center of Figure 2-2).

Figure 2-1

5. Rotate the tray until the ears are under the leg brace

support of each leg and push slightly and they will lock

in place (Figure 2-5). The tripod is now completely

assembled (Figure 2-6).

Figure 2-5

ripod

Figure 2-6

STRO

4. Insert the cut-out in the center of the tray (flat side of the

tray facing down) to match the center of the tripod leg brace

and push down slightly (Figure 2-4). The ears of the tray

should appear as in Figure 2-4.

Figure 2-2

Figure 2-3

6. You can extend the tripod legs to the height you desire. At

the lowest level the height is 24" (61cm) and extends to 41"

(104 cm). You unlock the tripod leg lock knob at the bottom

of each leg (Figure 2-7) and pull the legs out to the height

you want and then lock the knob securely. A fully extended

tripod looks like the image in Figure 2-8.

Figure 2-7

#93610

ASTeR

RIpOd

Figure 2-8

Figure 2-4