Automotive Tazer JL Mini Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Діагностичне обладнання Automotive Tazer JL Mini. Automotive Tazer JL Mini 14 сторінок. For jeep wrangler jl & gladiator jt 2018-2020

Друкувати сторінку

lockers as if in 4LO. See LOCKERS in

Button Remap section for full locker

control

• Cooldown Mode: With the ignition

on but engine not running, press the

right arrow and cruise cancel button

at the same time to turn the engine

fan on High. They will also turn off

automatically if the battery voltage

drops below 11V.

• Winch Mode: With the engine running,

press the left arrow and cruise RES

buttons at the same time. The engine

will rise to the RPM selected in the live

menu (default 2000). There may be a

few seconds delay before it changes.

It will NOT raise if you touch the

accelerator pedal, and will cancel if you

do.

• Hood Alarm: Arm the factory Vehicle

Theft Alarm. If the hood is opened while

armed, the alarm will sound and the

Tazer JL Light show will be invoked. To

turn off, press the PANIC button on the

keyfob to turn off the alarm, and the

LOCK button to turn off the light show.

Set Panic needs to remain enabled for

this feature to function.

• Line Lock: While in 2WD, press and

hold the left arrow and cruise set(+)

buttons. Continue to hold and pump the

brakes twice, firmly. The Jeep will stay

held using only the front brakes while

you press on the accelerator to do a

burnout. "LineLock" will be displayed in

the cluster.

• Rock Crawl (patent pending): Press

and hold the left arrow and cruise

set(-) button, and pump the brakes

twice. The Jeep will hold using all

four brakes while you can work the

pedals to apply torque, and release the

buttons when you're ready to move.

"RockCrawl" will be displayed in the

cluster.

• Full traction control disable: Press and

hold the traction button for 5 seconds

to fully disable TC and ABS. Shut off

and re-start Jeep to re-enable.

• Force Backup camera: Double tap

the "mute" button to switch to backup

camera (8.4" and 7" only)

• Button Remap: This function allows

the assignment of "hotkeys" for

quick access to some of the Tazer's

functions. The cruise +/-/RES may be

used for this function. While the dash

is in Audio mode, press and hold the

RIGHT arrow and press the button you'd

like to remap. The choices are: