CELETTE CEL.11245-C-02 Оригінальний посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Оригінальний посібник для Зварювальна система CELETTE CEL.11245-C-02. CELETTE CEL.11245-C-02 15 сторінок.

HOT PARTS CAN BURN:

 Do not touch hot parts bare handed.

 Allow cooling period before working on equipment.

 To handle hot parts, use proper tools and/or wear heavy, insulated welding gloves

and clothing to prevent burns.

SIGNIFICANT DC VOLTAGE EXISTS AFTER REMOVAL OF INPUT POWER ON INVERTERS:

 Turn Off inverter, disconnect input power, and discharge input capacitors according to instructions in

Maintenance Section before touching any parts.

FUMES AND GASES CAN BE HAZARDOUS:

 Welding produces fumes and gases. Breathing these fumes and gases can be

hazardous to your health.

 Keep your head out of the fumes. Do not breathe the fumes.

 Ventilate the work area and/or use local forced ventilation at the arc to remove welding fumes and

gases. The recommended way to determine adequate ventilation is to sample for the composition

and quantity of fumes and gases to which personnel are exposed.

 If ventilation is poor, wear an approved air-supplied respirator.

 Read and understand the Safety Data Sheets (SDSs) and the manufacturer's instructions for

adhesives, coatings, cleaners, consumables, coolants, degreasers, fluxes, and metals.

 W ork in a confined space only if it is well ventilated, or while wearing an air-supplied respirator.

Always have a trained watchperson nearby. Welding fumes and gases can displace air and lower the

oxygen level causing injury or death. Be sure the breathing air is safe.

 Do not weld in locations near degreasing, cleaning, or spraying operations. The heat and rays of the

arc can react with vapors to form highly toxic and irritating gases.

 Do not weld on coated metals, such as galvanized, lead, or cadmium plated steel, unless the

coating is removed from the weld area, the area is well ventilated, and while wearing an air-supplied

respirator. The coatings and any metals containing these elements can give off toxic fumes if welded.

1.3 ADDITIONAL SYMBOLS FOR INSTALLATION, OPERATION, AND MAINTENANCE:

FIRE OR EXPLOSION HAZARD:

 Do not install or place unit on, over, or near combustible surfaces.

 Do not install or operate unit near flammables.

 Do not overload building wiring - be sure power supply system is properly sized,

rated, and protected to handle this unit.

FALLING EQUIPMENT CAN INJURY:

 Use correct procedures and equipment of adequate capacity to lift and support

unit.

 Follow the guidelines in the Applications Manual for the Revised NIOSH

Lifting Equation (Publication No. 94-110) when manually lifting heavy parts or

equipment.

 Secure unit during transport so it cannot tip or fall.

READ INSTRUCTIONS:

 Read and follow all labels and the Owner's Manual carefully before installing,

operating, or servicing unit. Read the safety information at the beginning of the

manual and in each section.

www.celette.com

Page No: 6