Automotive Data Solutions iDatastart Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Пульт дистанційного керування Automotive Data Solutions iDatastart. Automotive Data Solutions iDatastart 12 сторінок.
Також для Automotive Data Solutions iDatastart: Посібник користувача (18 сторінок)
Друкувати сторінку
COMMAND
BUTTON
DESCRIPTION
PROGRAMMING A NEW REMOTE
Are you replacing a lost or damaged remote or simply adding an extra remote to your iDatastart system?
Please take note of the following:
1. A functional iDatastart system must already be installed in your vehicle.
2. All new remotes must be installed by an iDatastart Authorized Dealer.
3. A maximum of 4 remotes can be programmed to your iDatastart system.
REPLACING REMOTE BATTERIES
Follow the steps below to replace the batteries in your iDatastart remotes*.
1. Insert a 25 cent coin into the hollow corner of your iDatastart remote.
2. Gently twist the coin until the casing pops open.
3. Use your coin to pry open the rest of the case perimeter.
4. Carefully remove the circuit board from the case.
5. Slide the old battery out of its enclosure and replace with the new battery.
6. Carefully replace the circuit board into bottom half of the casing.
7. Snap top and bottom casings back together using your hands.
REMOTE STARTING FROM FACTORY KEY FOB
Engine Stop
Stops the engine.
2022-01-27 © Automotive Data Solutions Inc. 4/11
TR1110A