HIFEI Technology Fulcrum Pro 300A Посібник - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник для Контролер HIFEI Technology Fulcrum Pro 300A. HIFEI Technology Fulcrum Pro 300A 12 сторінок. Brushless speed controller
Друкувати сторінкуFulcrum Pro/Pro+ 300A Brushless Speed Controller Manuals
ⅣB: Connect Fulcrum Pro/Pro+ 300A to PC
—Switch 'OFF' ESC.
—Connect ESC's receiver lead to Hifei USB Linker in right polarity.
—Insert Hifei USB Linker to one of USB Ports of PC.
—Connect ESC to battery. Switch 'ON'.
Fulcrum
Pro/ Pro+
300A ESC
ON
OFF
Switch
Note:
When ESC is successfully connected to computer, red LED on USB Linker will
light, and green LED on ESC will light.
If the green LED on ESC does not light, please check the connecting polarity between ESC's
receiver lead and USB Linker; and ensure connecting is tight.
www.hifei.com
USB Linker
Battery
Page 13
Fulcrum Pro/Pro+ 300A Brushless Speed Controller Manuals
IVC:
Fully Program ESC's Paramaters
— Double left click mouse the icon 'Hifei Vx.xx' on desktop.
— Click "open device" to enter into operations.
Note: Software V4.01 or newer version is improved to be able to automatically recognize right 'Com
Port', so there is no need to set 'Com Port' by hand, but click 'open device' to get into programming
interface.
— If connection succeed, it will jump into the following interface to program ESC settings. See the
following picture.
Note:
when finish the using of Hifei software ' V4.xx', close the software first, then pull out the USB
linker from your PC, or it may cause the crash of the computer.
www.hifei.com
Page 14