Celexon INF200 Посібник з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Аксесуари для проектора Celexon INF200. Celexon INF200 10 сторінок. Inflatable outdoor screen
Також для Celexon INF200: Інструкція з експлуатації Посібник з експлуатації (12 сторінок)
Construction
It is recommended to construct the screen with a second person.
Step 1:
Place and spread the frame of the screen (a) onto a flat surface. Make sure that the
front faces upwards (hook-up points upwards) and the zipper on the lower frame is
closed beforehand .
Step 2:
Stretch the projection cloth (b) and hold it with a second person at the outer
corners.
Start at the top two corners and place the cloth on the sides of the frame.
The frame is deliberately made slightly larger than the cloth may appear in the
first moment. This allows the optimum tension and flatness of the cloth when fully
assembled.
Align the cloth so that the two outer corners of the top of the cloth are applied to
the inside of the frame at the Velcro corners. (Fig. 1) Then connect the middle area
of the top side of the cloth to the frame. If possible, guide the cloth to the outer
edges of the velcro area.
Figure 1: Velcro strips Projection cloth and frame
4