Celexon Professional Plus Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Дошка Celexon Professional Plus. Celexon Professional Plus 8 сторінок. Screen
Також для Celexon Professional Plus: Посібник з монтажу (13 сторінок), Інструкція з експлуатації Посібник з експлуатації (6 сторінок), Інструкція з експлуатації Посібник з експлуатації (8 сторінок), Інструкція з експлуатації Посібник з експлуатації (11 сторінок)

Installing the Screen

Option 1: Ceiling mounting (screwed)

ATTENTION! Make sure that you are using stable ground.

Measure the distance (A) of the holes in the endcaps (two holes per side) and

transfer the distance to the ceiling. Make sure that the holes are straight and level

(parallel to the wall).

ATTENTION only on stone surfaces: Pre-drill the holes and insert the plugs (d).

Use appropriate plugs and screws for the mounting surface (if necessary, suitable

materials must be purchased separately). Then place the plate (f ) (one plate per

side cap) on the holes in the end cap. Use the screws (e) to mount the screen to

the ceiling.

CAUTION: Tighten the screws, but do not over tighten them. Over tightening

(for example by using a cordless screwdriver) can cause damage and interfere

with the screen's secure hold. If you notice cracks in the side cap, they need

to be replaced. The screen must not be used with defective caps. Please

contact celexon directly for replacement caps (WEB: www.celexon.co.uk,

Option 2: Wall mounting (screwed)

ATTENTION! Make sure you are using stable ground.

Measure the distance (A) of the holes in the endcaps (two holes per side) and

transfer the distance to the wall. Make sure that the holes are straight and in scale.

ATTENTION only on stone surfaces: Pre-drill the holes and insert the plugs (d).

Use appropriate plugs and screws for the mounting surface (if necessary, suitable