HiFiMAN HE400se Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Навушники HiFiMAN HE400se. HiFiMAN HE400se 7 сторінок.

Headband Adjustment

If the top of the headband does not touch your head, move the sliding black block

on each side of the headband so that the headband rests on top of your head.

Earpad Design and Replacement

The HE400se earpad is a beveled design with varying thicknesses to conform to

the human head. Should you need to remove and reinstall the earpad (i.e. for

replacement) keep the thinner part on the front side of the ear cup and thicker

part on the back. Fit the mounting flange onto the rim of the ear cup. Then

press around the mounting flange to make sure the earpad snaps into place.

①

Thick

②

③

HE400se

Thin

HE400se

Set-up and Operation

To obtain optimum performance, please allow at least 150 hours of

constant use for break-in of your new headphone. This break-in

period does not have to be at high volume.

The connectors utilize 3.5mm mini plugs on the headphone side.

Push the connector straight onto the socket. Repeat the process with

the other mini plug connector.

The supplied cable adapter with the large ¼" (6.35mm) jack is con-

nected with the typical headphone output of an amplifier or even

better with a headphone amplifier. Please be aware that many home

amplifiers will switch off the loudspeaker output when a headphone

is connected.

To clean your headphone, please use a soft, slightly damp cloth only.

Do not use any detergents and make sure not to let any fluid enter

the open sides of the headphone. The leather headband can be

maintained using standard leather care products. When your earpads

become worn and no longer offer a good connection to your head,

you should replace them with new ones which can be supplied from

your dealer, or head-direct.com. Note: The internal drivers do not

require maintenance. Any attempt to remove or modify them will

void your warranty.