Aire 3828AR7314S Інструкція з монтажу Посібник з монтажу - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Кондиціонер Aire 3828AR7314S. Aire 3828AR7314S 16 сторінок. Single split wall mounted air conditioner
Друкувати сторінкуTHE FOLLOWING SHOULD BE ALWAYS OBSERVED FOR SAFETY
Be sure to read "THE FOLLOWING SHOULD BE ALWAYS OBSERVED FOR SAFETY" before installing the air
conditioner.
Be sure to observe the cautions specified here as they include important items related to safety.
The indications and meanings are as follows.
WARNING
CAUTION
After reading this instructions, be sure to keep it together with the owner's manual in a handy place on the
customer's site.
Do not install it yourself (customer).
Incorrect installation could cause injury due to fire,
electric shock, the unit falling or leakage of water.
Consult the dealer from whom you purchased the
unit or special installer.
Install the unit securely in a place which can bear
the weight of the unit.
When installed in an insufficiently strong place,
the unit could fall causing injury.
Use the specified wires to connect the indoor and
outdoor units securely and attach the wires firmly
to the terminal board connecting sections so the
stress of the wires is not applied to the sections.
Incorrect connection and fixing could cause fire.
Attach the electrical part cover to the indoor unit
and the service panel to the outdoor unit securely.
If the electrical part cover of the indoor unit and/or
the service panel of the outdoor unit are not
attached securely, it could result in a fire or
electric shock due to dust, water, etc.
Do not install the unit in a place where an
inflammable gas leaks.
If gas leaks and accumulates in the area
surrounding the unit, it could cause an explosion.
: Could lead to death, serious injury, etc.
: Could lead to serious injury in particular environments when operated
incorrectly.
WARNING
Perform the installation securely referring to the
installation instruction.
Incorrect installation could cause a personal
injury due to fire, electric shock, the unit falling
or leakage of water.
Perform electrical work according to the installation
manual and be sure to use an exclusive circuit.
If the capacity of the power circuit is insufficient
or there is incomplete electrical work, it could
result in a fire or an electric shock.
Check that the refrigerant gas does not leak after
installation is completed.
Be sure to use the part provided or specified parts
for the installation work.
The use of defective parts could cause an injury
due to a fire, electric shock, the unit falling, etc.
CAUTION
Perform the drainage/piping work according
to the installation instruction.
If there is a defect in the drainage/piping work,
water could leak from the unit and household
goods could get wet and be damaged.
3