Galak Electronics VG-305B Посібник із швидкого старту - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Контролер Galak Electronics VG-305B. Galak Electronics VG-305B 8 сторінок. Ac traffic light controller
Друкувати сторінку
Make sure that all six terminals are sufficiently tight to ensure that the wires don't come loose. At
this point you are ready to power up your AC Traffic Light Controller. If everything is functioning
properly, your traffic light should follow the LEDs on the controller. Please note that the power
resistors will get warm (up to 50° C or 122° F). This is completely normal.
IMPORTANT NOTICE: If you are installing this unit in a metal enclosure, the
enclosure must be properly grounded. If you are connecting directly to a junction
box, make sure to use a 3-conductor UL approved cable. The green wire should be
connected to the junction box ground and the other end should be connected to the traffic light
enclosure via a ground stud or self-tapping screw. Conversely, if using a power cable, ensure
that the power cable has a ground prong, and again connect the green wire to the traffic light
enclosure via a ground stud or self-tapping screw. Failure to follow these precautions may lead
shock, fire, property damage or even death. Please contact
any questions or concerns.
SPECIFICATIONS:
Supply Voltage
Power Consumption
Max Output Rating
Input Connector
Output Connectors
Cycle Delay Range
Board Dimensions
Board Material
Finished Weight
Good luck and enjoy you new AC Traffic Light Controller. We appreciate your business.
Galak Electronics
Electronic kits and components
90VAC to 130VAC (180VAC to 260VAC for 240VAC version)
4mA @ 120VAC (approximately 0.5 watts with no output load)
120VAC @ 4.2A per channel (fused at 5A)
14-26AWG, 250VAC @ 16A Screw Terminals
14-26AWG, 250VAC @ 16A Screw Terminals
VR1: 1-120 seconds (Yellow 3-8 seconds)
3.94 x 1.97" (10 cm x 5.0 cm)
0.062" (1.6 mm) FR-4, with green solder mask & silk screen
1.15 ounces (33 grams)
use at (302) 832-1978 if you have
Email:
Phone: (302) 832-1978