DBI SALA Anchor on the Go Посібник з монтажу та експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Промислове обладнання DBI SALA Anchor on the Go. DBI SALA Anchor on the Go 20 сторінок. Portable roof anchor for metal roofs

Друкувати сторінку

1. Installing Anchor on the Go™ on the Roof

1.2 Strength of Supporting Structures

If it is unclear to the operator or competent person that the roof sheeting

or structure is adequate, the roof sheeting or structure shall be assessed

by an engineer. It is NOT SAFE to climb onto the roof on the same side

as you have attached the anchor or use it when connected to the same

side.

The supporting structure/ roof sheeting should be capable of sustaining

an ultimate load equal to 15kN for single point connection as per

AS/NZS1891.4.

1.3 Recommendations

Employers, Supervisors and Operators should ensure that:

• Locations of anchors comply with the requirements for safe use, safe

access, the pendulum effect, as stipulated in AS/NZS 1891.4 clause

3.2.

• Structural supports for anchors are assessed separately by a suitably

qualified engineer (as stipulated in AS/NZS 1891.4, clause 3.1.2.)

or by a competent person, as appropriate, and the assessment

documented.

• Anchors are inspected for compliance with the requirements in

AS/NZS 1891.4 clause 9.3.3 and the inspection documented. The

Figure One