Dynamite Passport DYNC3000 Інструкція з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Зарядний пристрій Dynamite Passport DYNC3000. Dynamite Passport DYNC3000 8 сторінок. Ultra 100w lcd ac/dc multi-chemistry battery charger
Друкувати сторінку
6 - NICKEL DISCHARGING
1. Connect the banana plugs of the battery adapter cable to the Power Output
9. The charger will check the battery and charger settings and discharging will begin. The
Black (–) and Power Output Red (+), making sure that the positive and
charger will beep and display the following screen:
negative connectors are not reversed.
NiMH DCHG
2. Connect the battery connector to the battery adapter cable.
Capacity
:
Current
:
3. Press the Left and Right Arrows on the LCD Touch Screen to scroll through
Voltage
:
the main menu screens until you reach Program Select=Ni-MH/Ni-Cd.
Resistance
:
Peak Temp.
:
Program select=NiMH
10. Press the arrow in the top right of the LCD Touch Screen to see the rest of
N i M H
the Discharging information.
11. Press Graph to see the battery voltage graph. Press Back to return to the
CHG
DCHG
CYCLE
discharging screen.
Data NiMH = Graph
4. Press DCHG.
NiMH DISCHARGE
End Volt
:
0.10V
Capacity
:
50mAh
Current
:
0.1A
Press&Hold
:
DISCHRG
8.39V
000:47S
BACK
SELECT
12. Press STOP at any time to stop discharging.
13. When discharging is complete, the charger will sound a series of beeps and
5. Press a parameter to highlight that parameter.
display the following screen:
6. Press the Up and Down Arrows to edit the parameter.
NiMH DONE
7. Press Select to save the parameter.
Capacity
:
8. Once the parameters are at the desired settings, press and hold DISCHRG.
Current
:
Voltage
:
Resistance
:
Peak Temp.
:
14. Disconnect the battery from the charger.
7 - NICKEL CYCLE CHARGING
1. Connect the banana plugs of the battery adapter cable to the Power Output
11. Press the arrow in the top right of the LCD Touch Screen to see the rest of
Black (–) and Power Output Red (+), making sure that the positive and
the Cycle information.
negative connectors are not reversed.
12. Press CYCLE to see the voltage and amperage applied to each cycle.
2. Connect the battery connector to the battery adapter cable.
Data NiMH = Cycle 1/1
3. Press the Left and Right Arrows on the LCD Touch Screen to scroll through
the main menu screens until you reach Program Select=Ni-MH/Ni-Cd.
--CHG--
00.00Vp
Program select=NiMH
00000mAh
N i M H
13. Press Graph to see the battery voltage graph. Press Back to return to the
charging screen.
CHG
DCHG
CYCLE
Data NiMH = Graph
4. Press CYCLE.
NiMH CYCLE
[1/2]
Capacity
:
50mAh
CHG Curr.
:
0.1A
DCHG Curr.
:
0.1A
DCHG End Volt
:
0.10V
Press&Hold
:
CYCLE
14. Press STOP at any time to stop charging.
BACK
SELECT
15. When cycle charging is complete, the charger will sound a series of beeps and
display the following screen:
5. Press a parameter to highlight that parameter.
6. Press the Up and Down Arrows to edit the parameter.
NiMH DONE
Capacity
:
7. Press Select to save the parameter.
Current
:
8. Press the top right of the LCD Touch Screen to get to the next set of
Voltage
:
Resistance
:
parameters.
Peak Temp.
:
9. Once the parameters are at the desired settings, press and hold CYCLE.
10. The charger will check the battery and charger settings and cycle charging will
begin. The charger will beep and display the following screen:
16. Disconnect the battery from the charger.
NiMH CYCLE
001:56S
Capacity
:
47mAh
Current
:
0.0A
Voltage
:
8.00V
Resistance
:
****mΩ
Peak Temp.
:
No sens
CAUTION: The Pb charge program menus are to be used ONLY for the charging and discharging of Pb battery packs. Charging other battery types using the Pb
charge programs will damage the battery or the charger.
8 - PB CHARGING
1. Connect the banana plugs of the battery adapter cable to the Power Output
10. Press START. The charger will beep and display the following screen:
Black (–) and Power Output Red (+), making sure that the positive and
Pb CHG
negative connectors are not reversed.
Capacity
:
Current
:
2. Connect the battery connector to the battery adapter cable.
Voltage
:
3. Press the Left and Right Arrows on the LCD Touch Screen to scroll through
Resistance
:
the main menu screens until you reach Program Select=Pb.
Peak Temp.
:
Program select=Pb
11. Press the arrow in the top right of the LCD Touch Screen to see the rest of
the charging info.
12. Press Graph to see the battery voltage graph. Press Back to return to the
charging screen.
CHG
DCHG
Data Pb
= Graph
4. Press CHG.
Pb CHARGE
Pack. Volt.
:
2V/1P
Capacity
:
50mAh
Current
:
0.1A
14.68V
000:12S
Press&Hold
:
CHARGE
13. Press STOP at any time to stop charging.
14. When charging is complete, the charger will sound a series of beeps and
display the following screen:
5. Press a parameter to highlight that parameter.
6. Press the Up and Down Arrows to edit the parameter.
Pb DONE
Capacity
:
7. Press Select to save the parameter.
Current
:
8. Once the parameters are at the desired settings, press and hold CHARGE.
Voltage
:
Resistance
:
9 . The charger will check the battery and charger settings and display the following
Peak Temp.
:
screen:
Pb Charge Confirm
15. Disconnect the battery from the charger.
-Connect-
-Check-
Input • • • • OK
Set: 6P
BATT. • • • • OK
Read: 5P
9 - PB DISCHARGING
1. Connect the banana plugs of the battery adapter cable to the Power Output
10. Press START. The charger will beep and display the following screen:
Black (–) and Power Output Red (+), making sure that the positive and
negative connectors are not reversed.
000:34S
2. Connect the battery connector to the battery adapter cable.
16mAh
1.8A
3. Press the Left and Right Arrows on the LCD Touch Screen to scroll through
8.43V
the main menu screens until you reach Program Select=Pb.
****mΩ
No sens
Program select=Pb
11. Press the arrow in the top right of the LCD Touch Screen to see the rest of
the discharging information.
12. Press Graph to see the battery voltage graph. Press Back to return to the
Discharging screen.
CHG
DCHG
4. Press DCHG.
Pb DISCHARGE
Pack. Volt.
:
2V/1P
Capacity
:
50mAh
Current
:
0.1A
Press&Hold
:
DISCHRG
13. Press STOP at any time to stop discharging.
14. When discharging is complete, the charger will sound a series of beeps and
display the following screen:
5. Press a parameter to highlight that parameter.
6. Press the Up and Down Arrows to edit the parameter.
026:01S
7. Press Select to save the parameter.
671mAh
0.0A
8. Once the parameters are at the desired settings, press and hold DISCHRG.
9.25V
9. The charger will check the battery and charger settings and display the
14mΩ
following screen:
No sens
Pb DCHG Confirm
15. Disconnect the battery from the charger.
-Connect-
-Check-
Input • • • • OK
Set: 6P
BATT. • • • • OK
Read: 5P
10 - SETUP
--DISCHG--
00.00Va
1. Press the Left and Right Arrows on the LCD Touch Screen to scroll through
6. Press the top right of the LCD Touch Screen to get to the next set of
00000mAh
the main menu screens until you reach Program Select=Setup.
parameters.
Program select=Setup
Parameters
Input Power Low Voltage Cutoff 10.0V–15.0V
SETUP
2. Press SETUP.
USER SETUP
[1/3]
Temp (ºC/ºF)
:
ºC
Temp Cutt-Off :
60ºC
Input Low Volt :
10.0V
Safety Timer
:
240min
Balance Volt
:
0.01V
BACK
SELECT
026:01S
671mAh
3. Press a parameter to highlight that parameter.
0.0A
4. Press the Up and Down Arrows to edit the parameter.
9.25V
14mΩ
5. Press Select to save the parameter.
No sens
11 - VIEW
1. Press the Left and Right Arrows on the LCD Touch Screen to scroll through
3. Press CELLS to view the connected lithium battery's individual cell voltage.
the main menu screens until you reach Program Select=View.
Program select=View
VIEW
BALANCE
2. Press VIEW. The screen will display the current charger status.
DATA VIEW
Input Volt
:
15.30V
Output Volt
:
0.02V
Int Temp.
:
29ºC
Ext Temp.
:
No sens
Resistance
:
****mΩ
000:16S
8mAh
1.7A
14.69V
****mΩ
No sens
12 - BALANCE
1. Press the Left and Right Arrows on the LCD Touch Screen to scroll through
5. Press STOP at any time to stop balancing.
the main menu screens until you reach Program Select=View.
6. When balancing is complete, the charger will beep and display the following
BACK
screen:
Program select=View
VIEW
BALANCE
2. Press BALANCE.
3. Press the type of battery you want to balance: Li-Po/Li-Ion/Li-Fe.
000:19S
4. Press START. The charger will begin balancing the cells.
8mAh
1.7A
BATTERY
11.60V
****mΩ
LiPo
LiIon
LiFE
No sens
13 - MEMORY
1. Press the Left and Right Arrows on the LCD Touch Screen to scroll through
the main menu screens until you reach the battery program you would like to
Pb DCHG
000:19S
save: Program Select=Li-Po/Li-Fe/Li-Ion/Ni-MH/Ni-Cd/Pb.
Capacity
:
8mAh
Current
:
1.7A
2. Press the action at the bottom of the LCD Touch Screen to enter that menu.
Voltage
:
11.60V
3. Press a parameter to highlight that parameter.
Resistance
:
****mΩ
4. Press the Up and Down Arrows to edit the parameter.
Peak Temp.
:
No sens
5. Press Select to save the parameter.
6. If there is more than one screen of parameters, press the top right corner of
the LCD Touch Screen to scroll through the parameter screens.
7. Once the parameters are at the desired settings, press Back to return to the
main menu screens.
8. Press the Left and Right arrows on the LCD Touch Screen to scroll through
Data Pb
= Graph
the main menu screens until you reach Program Select=Memory.
BACK
Program select=Memory
11.54V
000:32S
MEMORY
9. Press MEMORY.
Pb DONE
000:19S
Capacity
:
8mAh
Current
:
1.7A
Voltage
:
11.60V
Resistance
:
****mΩ
Peak Temp.
:
No sens
14 - USB DEVICE CHARGING
The charger has the capability to charge any USB-compatible device with the 2.1A USB Power Output Port (F). To use the charging function, simply connect a
compatible charging device or cord into the charge port while the charger is powered ON. The charger provides up to 2.1A current at 5V DC.
15 - TROUBLESHOOTING
During charger operation, circuits monitor battery and charger functions. If the following messages show on the charger's LCD screen, make the recommended
responses. If the message continues after you respond as recommended, contact your nearest Horizon Hobby customer service center for assistance.
REVERSE POLARITY
Make sure each connection polarity is correct between the power source and the charger, then between the charger and the battery.
PROCESS INTERRUPTED
Make sure the power connections are correct for charging.
OUTPUT SHORT CIRCUIT
Make sure there are no short circuits between the poles of the battery or the battery and the charger. Replace damaged wires.
INPUT VOLTAGE ERROR
Input voltage to the charger fell below the default or adjusted input voltage setting. Make sure the power source for the charger
provides correct input voltage.
CHARGER FAILURE
Charger electronics require repair.
BATTERY LOW VOLTAGE
Battery voltage is lower than the value setting in the charger. Adjust settings, then make sure the battery is not damaged or replace the
Temperature °C/°F
battery.
Temperature Cutoff 68–176°F (20–80°C)
BATTERY HIGH VOLTAGE
Battery voltage is higher than the value setting in the charger. Adjust settings, then make sure the battery is not damaged or replace the
battery.
Safety Timer 1–720 minutes
CELL LOW VOLTAGE
Cell voltage is lower than the value setting in the charger. Adjust settings, then make sure the battery is not damaged or replace the
Balance Voltage 0.01V–0.03V
battery.
Back Light OFF–100%
CELL HIGH VOLTAGE
Cell voltage is higher than the value setting in the charger. Adjust settings, then make sure the battery is not damaged or replace the
battery.
Melody 1–5
CELL CONNECT ERROR
Make sure the balance connection is correct for charging.
Button Sound ON/OFF
Buzzer Sound ON/OFF
CHARGER OVERHEATING
Charger temperature is too high. Power OFF the charger and let it cool.
Buzzer Volume 0–100%
OVER POWER
Input voltage to the charger exceeded the default or adjusted input voltage setting. Make sure the power source for the charger provides
the correct input voltage.
Username Enter your name here
MAX CURRENT
Current is higher than the value setting in the charger. Adjust settings, then make sure the battery is not damaged or replace the battery.
Version
SAFETY TIMER
Maximum safe time limit has been reached.
Press and hold FCTY RST to return the
Factory Reset
charger to default factory settings.
MAX CAPACITY
Maximum capacity limit has been reached.
MAX EXT. TEMP
External temperature is too high. Let charger and battery cool.
DYNAMITE 5-YEAR US LIMITED CHARGER WARRANTY INFORMATION
Horizon Hobby is so confident about the quality of our Dynamite chargers we offer a 5-year replacement plan on all of our Dynamite
5-year replacement plan requires proof of purchase (copy of the receipt), and we do reserve the right to deny replacement to any abusers of our plan. See below for full
details. Contact the appropriate Horizon Service Department for instructions on warranty claims.
DATA VIEW–CELLS
5-YEAR US LIMITED WARRANTY
BACK
1 > 0.00
Warranty Period - Exclusive Warranty - Horizon Hobby, LLC ("Horizon") warrants
2 > 0.00
that the included Dynamite Prophet, or Passport charger ("Product") will be free from
3 > 0.00
defects in materials and workmanship for a period of five (5) years after the date of
4 > 0.00
purchase ("Warranty Period").
5 > 0.00
What is Not Covered - This warranty is not transferable and does not cover
6 > 0.00
(i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse,
negligence, commercial use, or due to improper use, installation, operation
or maintenance, (iii) modification of or to any part of the Product, (iv) attempted
service by anyone other than a Horizon Hobby authorized service center, (v) Product
not purchased from an authorized Horizon dealer, or (vi) Product not compliant with
applicable technical regulations.
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER
WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL
IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE
HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS
OF THE PURCHASER'S INTENDED USE.
Purchaser's Remedy - Horizon's sole obligation and purchaser's sole and exclusive
remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any
Product determined by Horizon to be defective. Horizon reserves the right to inspect
any and all Product(s) involved in a warranty claim. Service or replacement decisions
are at the sole discretion of Horizon. Proof of purchase is required for all warranty
claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE
PURCHASER'S SOLE AND EXCLUSIVE REMEDY. Replacement Products are covered
under this warranty for thirty (30) days after receipt or for the remainder of the
Warranty Period of the Product which they have replaced, whichever is longer.
Limitation of Liability - HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION
OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM
-Balancing Complete-
IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR
ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE
1 > 3.94
2 > 3.94
POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon
3 > 0.00
exceed the individual price of the Product on which liability is asserted. As Horizon
4 > 0.00
has no control over use, setup, final assembly, modification or misuse, no liability
5 > 0.00
shall be assumed nor accepted for any resulting damage or injury. By the act of use,
6 > 0.00
setup or assembly, the user accepts all resulting liability. If you as the purchaser or
user are not prepared to accept the liability associated with the use of the Product,
purchaser is advised to return the Product immediately in new and unused condition
to the place of purchase.
Law - These terms are governed by Illinois law (without regard to conflict of law
principals). This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state. Horizon reserves the right to change or
modify this warranty at any time without notice.
WARRANTY SERVICES
Questions, Assistance, and Services - Your local hobby store and/or place of
purchase cannot provide warranty support or service. Once assembly, setup or use
of the Product has been started, you must contact your local distributor or Horizon
directly. This will enable Horizon to better answer your questions and service you in
the event that you may need any assistance. For questions or assistance, please visit
our website at www.horizonhobby.com, submit a Product Support Inquiry at https://
horizonhobby.quickbase.com/db/bghj7ey8c?a=GenNewRecord, or call the toll free
telephone number referenced in the Warranty and Service Contact Information
section to speak with a Product Support representative.
NON-US LIMITED WARRANTY
What this Warranty Covers - Exclusive Warranty - Horizon Hobby, LLC (Horizon)
10. Choose an empty memory profile and press it.
warrants to the original purchaser that the product purchased (the "Product")
USER SETUP
[1/4]
will be free from defects in materials and workmanship at the date of purchase.
M01 NULL
What is Not Covered - This warranty is not transferable and does not cover
M02 NULL
(i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse,
M03 NULL
negligence, commercial use, or due to improper use, installation, operation
M04 NULL
or maintenance, (iii) modification of or to any part of the Product, (iv) attempted
M05 NULL
service by anyone other than a Horizon Hobby authorized service center, (v) Product
not purchased from an authorized Horizon dealer, or (vi) Product not compliant with
applicable technical regulations.
11. Press SAVE. The charging parameters you just entered will be saved in that
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER
WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL
memory profile.
IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
12. To use a memory profile, press it, then press LOAD.
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR
13. To delete a memory profile, press it, then hold DEL.
A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE
HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS
14. Press the top right of the LCD Touch Screen to scroll through all 20 memory
OF THE PURCHASER'S INTENDED USE.
profiles.
Purchaser's Remedy - Horizon's sole obligation and purchaser's sole and exclusive
remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any
Product determined by Horizon to be defective. Horizon reserves the right to inspect
any and all Product(s) involved in a warranty claim. Service or replacement decisions
are at the sole discretion of Horizon. Proof of purchase is required for all warranty
claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE
PURCHASER'S SOLE AND EXCLUSIVE REMEDY.
Limitation of Liability - HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION
OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM
IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR
ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon
exceed the individual price of the Product on which liability is asserted. As Horizon
has no control over use, setup, final assembly, modification or misuse, no liability
shall be assumed nor accepted for any resulting damage or injury. By the act of use,
setup or assembly, the user accepts all resulting liability. If you as the purchaser or
user are not prepared to accept the liability associated with the use of the Product,
purchaser is advised to return the Product immediately in new and unused condition
to the place of purchase.
Law - These terms are governed by Illinois law (without regard to conflict of law
principals). This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state. Horizon reserves the right to change or
modify this warranty at any time without notice.
WARRANTY SERVICES
Questions, Assistance, and Services - Your local hobby store and/or place of
purchase cannot provide warranty support or service. Once assembly, setup or use
of the Product has been started, you must contact your local distributor or Horizon
directly. This will enable Horizon to better answer your questions and service you in
the event that you may need any assistance. For questions or assistance, please visit
our website at www.horizonhobby.com, submit a Product Support Inquiry at https://
horizonhobby.quickbase.com/db/bghj7ey8c?a=GenNewRecord, or call the toll free
telephone number referenced in the Warranty and Service Contact Information
section to speak with a Product Support representative.
Country of Purchase
(Repairs and Repair Requests)
United States of America
(Product Technical Assistance)
Horizon Technischer Service
European Union
Sales: Horizon Hobby GmbH
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Compliance Statement: Horizon Hobby, LLC hereby declares that this
product is in compliance with the essential requirements and other relevant
provisions of the EMC and LVD Directives
A copy of the EU Declaration of Conformity is available online at:
http://www .horizonhobby .com/content/support-render-compliance .
®
Prophet
™
and Passport
™
chargers. Our
Inspection or Services - If this Product needs to be inspected or serviced and
is compliant in the country you live and use the Product in, please use the Horizon
Online Service Request submission process found on our website or call Horizon to
obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely
using a shipping carton. Please note that original boxes may be included, but are
not designed to withstand the rigors of shipping without additional protection. Ship
via a carrier that provides tracking and insurance for lost or damaged parcels, as
Horizon is not responsible for merchandise until it arrives and is accepted at our
facility. An Online Service Request is available at http://www.horizonhobby.com/
content/_service-center_render-service-center. If you do not have internet access,
please contact Horizon Product Support to obtain a RMA number along with
instructions for submitting your product for service. When calling Horizon, you will
be asked to provide your complete name, street address, email address and phone
number where you can be reached during business hours. When sending product
into Horizon, please include your RMA number, a list of the included items, and a
brief summary of the problem. A copy of your original sales receipt must be included
for warranty consideration. Be sure your name, address, and RMA number are
clearly written on the outside of the shipping carton. YOU MUST CONTACT THE
APPROPRIATE HORIZON SERVICE DEPARTMENT FOR ANY CHARGER WARRANTY
CLAIM.
Warranty Requirements - For Warranty consideration, you must include
your original sales receipt verifying the proof-of-purchase date. Provided
warranty conditions have been met, your Product will be serviced or replaced free
of charge. Service or replacement decisions are at the sole discretion of Horizon.
Non-Warranty Service - Should your service not be covered by warranty,
service will be completed and payment will be required without
notification or estimate of the expense unless the expense exceeds 50%
of the retail purchase cost. By submitting the item for service you are
agreeing to payment of the service without notification. Service estimates
are available upon request. You must include this request with your item submitted
for service. Non-warranty service estimates will be billed a minimum of ½ hour
of labor. In addition you will be billed for return freight. Horizon accepts money
orders and cashier's checks, as well as Visa, MasterCard, American Express, and
Discover cards. By submitting any item to Horizon for service, you are agreeing to
Horizon's Terms and Conditions found on our website http://www.horizonhobby.com/
content/_service-center_render-service-center.
ATTENTION: Horizon service is limited to Product compliant in the country
of use and ownership. If received, a non-compliant Product will not be
serviced. Further, the sender will be responsible for arranging return
shipment of the un-serviced Product, through a carrier of the sender's choice
and at the sender's expense. Horizon will hold non-compliant Product for a
period of 60 days from notification, after which it will be discarded.
Inspection or Services - If this Product needs to be inspected or serviced and
is compliant in the country you live and use the Product in, please use the Horizon
Online Service Request submission process found on our website or call Horizon to
obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely
using a shipping carton. Please note that original boxes may be included, but are
not designed to withstand the rigors of shipping without additional protection. Ship
via a carrier that provides tracking and insurance for lost or damaged parcels, as
Horizon is not responsible for merchandise until it arrives and is accepted at our
facility. An Online Service Request is available at http://www.horizonhobby.com/
content/_service-center_render-service-center. If you do not have internet access,
please contact Horizon Product Support to obtain a RMA number along with
instructions for submitting your product for service. When calling Horizon, you will
be asked to provide your complete name, street address, email address and phone
number where you can be reached during business hours. When sending product into
Horizon, please include your RMA number, a list of the included items, and a brief
summary of the problem. A copy of your original sales receipt must be included for
warranty consideration. Be sure your name, address, and RMA number are clearly
written on the outside of the shipping carton.
NOTICE: Do not ship Li-Po batteries to Horizon. If you have
any issue with a Li-Po battery, please contact the appropriate Horizon
Product Support office.
Warranty Requirements - For Warranty consideration, you must include
your original sales receipt verifying the proof-of-purchase date. Provided
warranty conditions have been met, your Product will be serviced or replaced free
of charge. Service or replacement decisions are at the sole discretion of Horizon.
Non-Warranty Service - Should your service not be covered by warranty,
service will be completed and payment will be required without notification
or estimate of the expense unless the expense exceeds 50% of the retail
purchase cost. By submitting the item for service you are agreeing to payment of
the service without notification. Service estimates are available upon request. You
must include this request with your item submitted for service. Non-warranty service
estimates will be billed a minimum of ½ hour of labor. In addition you will be billed
for return freight. Horizon accepts money orders and cashier's checks, as well as Visa,
MasterCard, American Express, and Discover cards. By submitting any item to Horizon
for service, you are agreeing to Horizon's Terms and Conditions found on our website
http://www.horizonhobby.com/content/_service-center_render-service-center.
ATTENTION: Horizon service is limited to Product compliant in the country
of use and ownership. If received, a non-compliant Product will not be
serviced. Further, the sender will be responsible for arranging return
shipment of the un-serviced Product, through a carrier of the sender's choice
and at the sender's expense. Horizon will hold non-compliant Product for a
period of 60 days from notification, after which it will be discarded.
WARRANTY AND SERVICE CONTACT INFORMATION
Horizon Hobby
Contact Information
Address
Horizon Service Center
servicecenter.horizonhobby.com/
RequestForm/
Horizon Product Support
4105 Fieldstone Rd
877-504-0233
Champaign, Illinois, 61822 USA
Sales
800-338-4639
Hanskampring 9
D 22885 Barsbüttel, Germany
+49 (0) 4121 2655 100
FCC INFORMATION
Instructions for disposal of WEEE by users in the European Union
This product must not be disposed of with other waste . Instead, it is the user's
responsibility to dispose of their waste equipment by handing it over to a desig-
nated collections point for the recycling of waste electrical and electronic equipment . The
separate collection and recycling of your waste equipment at the time of disposal will help
to conserve natural resources and ensure that it is recycled in a manner that protects hu-
man health and the environment . For more information about where you can drop off your
waste equipment for recycling, please contact your local city office, your household waste
disposal service or where you purchased the product .