Autonics BUM4-40D-W/B Series Посібник з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Аксесуари Autonics BUM4-40D-W/B Series. Autonics BUM4-40D-W/B Series 3 сторінки. 4-channel u-shaped photoelectric sensors
Друкувати сторінку
Specifications
Model
BUM4-40D-W-4M
Sensing type
Through-beam
Sensing distance
40 mm
Sensing target
Opaque materials
Min. sensing target
≥ Ø 4 mm
Response time
≤ 1 ms
Light source
Infrared
Peak emission
940 nm
wavelength
Operation mode
Dark ON mode
Indicator
Output Indicator (red), power indicator (green)
Approval
ᜢ ᜫ
Unit weight (packaged)
≈ 500 g (≈ 510 g)
Power supply
18-35 VDCᜡ ±10 % (ripple P-P: ≤ 10%)
Current consumption
≤ 50 mA
Control output
NPN open collector output (individual 4 output)
Load voltage
≤ 35 VDCᜡ
Load current
≤ 100 mA
Residual voltage
≤ 4 VDCᜡ
Protection circuit
Reverse power protection circuit, output short overcurrent protection circuit
Insulation resistance
≥ 20 MΩ (500 VDCᜡ megger)
Noise immunity
±240 VDCᜡ the square wave noise (pulse width: 1 ㎲) by the noise simulator
Dielectric strength
1,000 VACᜠ 50/60 Hz for 1 min
1.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z
Vibration
direction for 2 hours
Shock
500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times
Ambient illuminance
Sunlight: ≤ 11,000 lx, incandescent lamp: ≤ 3,000 lx
(receiver)
Ambient temperature
-25 to 65 ℃, storage: -25 to 70 ℃ (no freezing or condensation)
Ambient humidity
35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation)
Protection rating
IP65 (IEC standard)
Connection
Cable type
Cable spec.
Ø 6 mm, 8-wire, 2 m / 3 m / 4 m model
Wire spec.
AWG22 (1.2 mm, 60-core)
Material
Case, cover: ABS
BUM4-40D-W-□/A
BUM4-40D-W-□/B
≈ 500 g (≈ 1.5 kg)
≈ 500 g (≈ 1.5 kg)
18, Bansong-ro 513Beon-gil, Haeundae-gu, Busan, Republic of Korea, 48002
www.autonics.com | +82-2-2048-1577 | [email protected]