Galanz 9023010 Інструкція з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Мікрохвильова піч Galanz 9023010. Galanz 9023010 12 сторінок.

Друкувати сторінку

1. Setting the Clock

Use single digit to set a cooking power level:

Number pad

1,0

NOTE: During cooking, the current cooking power level can be seen by pressing POWER LEVEL pad. If

you want to set 100% power level, you can omit the step 3 given above.

IME DEFROST

1. In standby mode, press TIME DEFROST pad.

2. Press number pads to enter defrosting time. The longest time is 99 minutes and 99 seconds.

3. Press START/+30 SEC. pad.

NOTE: During defrosting program, the system will pause and sound beeps to remind user to turn food

over, and then press START/+30 SEC. pad to resume.

EIGHT DEFROST

1. Press WEIGHT DEFROST pad once.

2. Press number pads to enter weight of food. The frozen food weight ranges from 100 g to 1800 g.

3. Press START/+30 SEC. pad.

NOTE:During defrosting program, the system will pause and sound to remind user to turn food over,

after that, press START/+30 SEC. to resume the defrosting.

ULTISTAGE COOKING

Your oven can be programmed up to 3 automatic cooking sequences. It can be composed of time defrost

with one or two microwave cooking program, or composed of two microwave cooking program.

A. Time defrost with one or two-stage microwave cooking

1. Open the door and place the food into the oven, close it.

2. Press TIME DEFROST pad once.

3. Enter desired defrosting time by pressing correct number pads.

4. Input the first microwave cooking program. Do not press START/+30 SEC. pad.

5. Input the second microwave cooking program.

6. Press START/+30 SEC. to start.

NOTE: Step 5 is not necessary if you have one microwave cooking program. Time defrost can only be set

in the first stage.

B. Two-stage microwave cooking

Some recipes require different stages of cooking at different temperatures.

1. Input the first microwave cooking program.

2. Input the second microwave cooking program.

3. Press START/+30 SEC. to start.

Cooking power (Display)

100% (P100)

90% (P-90)

80% (P-80)

70% (P-70)

60% (P-60)

50% (P-50)

Number pad

Cooking power (Display)

40% (P-40)

30% (P-30)

20% (P-20)

10% (P-10)

0% (P-00)