CellarCool RTN400 Посібник з монтажу - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник з монтажу для Терморегулятор CellarCool RTN400. CellarCool RTN400 15 сторінок. 24v thermostat conversion kit to be used in
conjunction with fully ducted split series
Також для CellarCool RTN400: Посібник з монтажу (15 сторінок)
Друкувати сторінку19
Route 18/5 thermostat wire from the thermostat
location to the evaporator unit. Insert the wire
through one of the knockouts for the line set,
electrical or bottle probe.
20
Route 18/5 thermostat wire into electrical
compartment as shown. Note: cork tape will need
to be moved aside to slide wire through.
21
Route 18/5 thermostat wire down to the location
shown on the electrical panel.
22
Strip off 6" from the thermostat wire casing. Cut
and remove white thermostat wire. Strip off about
¼" of the blue, red, green and yellow thermostat
wire casing to expose the copper.
REAR OF UNIT
BOTTOM OF UNIT
6"
www.cellarcool.com | Page 9