8x8 Inc MP-112 Посібник із швидкого старту - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для VoIP 8x8 Inc MP-112. 8x8 Inc MP-112 6 сторінок. Analog phone and fax

A U D I O C O D E S Q U I C K S T A R T G U I D E

Installing your AudioCodes ATA

Connect your device using the ports on the back panel. You need either an analog phone or a fax machine with an analog phone to

activate your device using any of the FXS ports. After connecting the necessary ports, you are ready to use your ATA.

• Use the FXS port to connect an analog phone (or fax machine) with an RJ-11 telephone cable (for MP112, MP114, and MP118) or

with an "Amphenol" connector (for MP124).

• The Internet port connects to a spare switch port on your router, your cable or DSL Broadband Modem, or a standalone multi-

port Ethernet switch device.

• The Power port is where you connect your AC power cable.

Label

100-240~0.3A

max. 50-60Hz

Ethernet

RS-232

FXS

Reset

AC power cord socket

10/100Base- TX Uplink socket.

RS-232 status port (requires a DB-9 to PS/2 adapter).

Note: MP-112 does not provide a serial port.

Provides two, four, or eight FXS ports (depending on MediaPack model).

Note: MP-112 does not support FXO interfaces.

Reset button for resetting the device.

Component Description