AFI Branding ReFrame RC051 Інструкція з монтажу - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Стелажі та підставки AFI Branding ReFrame RC051. AFI Branding ReFrame RC051 2 сторінки. Double-sided cube
Друкувати сторінку
assembly instructions
RC051 - double-sided cube ReFrame®
5
Ensure each corner is fixed with 2 vertical facing
brackets
7
Ensure vertical frames are correctly
in place
10
Using the provided allen key, fix the corner brackets
12
Applying your custom ReFrame® fabric skin
Now that you've finished assembling your ReFrame®, it's time to apply your custom ReFrame® fabric skin. Please refer to
either a printed 'ReFrame® Fabric Installation Guide' or go to www.reframe.com.au to watch one of our instructional
assembly videos to see how to correctly apply your ReFrame® fabric skin.
NOTE: The assembly instructions for the RC051 (and included components) illustrate the fundamental steps to assemble a
'standard' Double-Sided Cube type ReFrame®. If your Reframe® is oversize, has additional components such as joiners (not
shown on this fact sheet), accessories, or has bends/curves and you are unsure how to proceed with assembly, please contact
the team at AFI Branding on 1300 652 514 and we will guide you through the assembly process.
Developed by AFI Branding
www.afibranding.com.au
6
8
Repeat step 2, 3 and 4 to make the
top frame
11
|
1300 652 514
|
33 Lakewood Blvd, Carrum Downs, Vic, 3201
Lower vertical lengths onto vertical facing brackets
9
Connect top frame to vertical
lengths
Repeat step 8 on all remaining brackets to complete
frame