9.Solutions C-pan Arm Інструкція користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція користувача для Аксесуари для фотоапаратів 9.Solutions C-pan Arm. 9.Solutions C-pan Arm 12 сторінок.

Друкувати сторінку


Setup:
A heavy duty tripod is required to mount the C-pan arm.
Insure that the max load capacity of the tripod is not
exceeded.
For best stability, spread the legs on the tripod as much as
it is possible and make sure all the leg and lock knobs are
securely tightened.
During transportation or when not in use, lock the two
arms together with the lock pin. Align arms and push pin
down into the bottom arm. The pin can be used on either
side to lock the arms.
When mounting the C-pan on a tripod, loosen the fulcrum
plate and tilt it at a 90 degree angle to the underside of the
arm.
If there is a need to use the C-pan for vertical movements,
try to position the tripod legs so that there is a free space
on the left side of the C-pan arm. This will allow the arm to
travel uninterrupted down the side of the tripod.
When operating the C-pan arm, lift the lock pin until its
bottom tip is flush with underside of arm.

The lock pin can be removed completely if it is in the way.
1.
Place the C-pan on the tripod
2.
Tighten the finger nut onto the tripod's 3/8" thread.
3.
Securely tighten the nut with included Allen wrench.
4
of
12