909 50620 Посібник користувача - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник користувача для Газонокосарка 909 50620. 909 50620 19 сторінок. 139cc 4 stroke petrol lawn mower

Друкувати сторінку

Starting the Engine

Take note of the following warnings before starting your lawn mower:

• Never allow young children to operate power tools or equipment.

• Make sure children and pets stay indoors while you're working.

• Before starting up the lawn mower, walk the area. Relocate toys, hoses,

rocks and sticks. Debris such as stones, wood chips and pieces of aged

blades can be propelled at high speeds, which can cause a fatal accident.

• Slow down and take care when mowing around corners, trees, shrubbery

or other obstacles.

• Wear closed-toe, slip-resistant shoes, safety glasses, strong gloves, a hat

and ear protection. Cover your skin as much as possible.

NOTE: Before starting the lawn mower check the oil and fuel levels.

Warranty will be void if the engine becomes faulty due to insufficient oil and

fuel levels.

Ensure the mower is set to the highest height setting so the blade is not

resting deep into the grass.

1. Press the area of the on/off switch (2) marked "I" for the ON position. (Fig Q)

2. Depress the priming bulb (22) fully 2-3 times. (Fig R)

3. Pull the recoil starter (16) lightly until you feel resistance then pull quickly

until the engine starts. (Fig S)

Do not pull the cord with a jerk or release it until fully rewound.

Speed Control.

The speed of this motor is pre set at the factory and will automatically

maintain the motor speed during operation. There is NO speed adjustment.

Stopping the engine

To stop the lawn mower engine, press the area of the on/off switch (2) marked

"O" fully. (Fig Q)

"I" = ON

"O" = OFF

e-mail: [email protected]

MODEL: №. 50620

139cc 4 Stroke Petrol Lawn Mower

AFTER SALES SUPPORT

1800 909 909

(toll free)

TIGHTEN

139cc 4 Stroke Petrol Lawn Mower

EMERGENCY STOPPING

In the event the on/off switch (2) does not stop the engine, the following

processes will assist.

NEVER move the mower, or attempt to move the mower if the controls

DO NOT turn off the motor.

DO NOT attempt to lift or tip the mower on its side.

In the event the OFF switch (2) does not turn off the motor, press the primer

bulb fully 4 or 5 times quickly. The engine should stop.

If this fails to stop the engine, remove the spark plug cap from the spark plug (24).

IMPORTANT: If the spark plug method is used, it is recommended to wear a

rubber glove when grasping the spark plug cap.

Persons with heart conditions or any medical condition which can be affected

by electric shock should not attempt this method.

NOTE: If the above methods do not stop the mower, let the mower to

continue to run until the tank runs out of petrol. DO NOT leave the mower

unattended if the run down method is used.

When the motor has stopped, the fuel should be drained from the fuel tank

(14), spark plug cap (24) removed (if not already removed), and the mower

must NOT be restarted until the problem has been fixed by an Authorised

Service Agent.

Important Primer bulb information.

The priming bulb (22) pump is designed to deliver fuel directly into the

engine for easy start.

Follow these guidelines and you should have trouble free starting.

For first starting at the beginning of the mower session, pump the priming

bulb (22) 2- 3 times. DO NOT EXCEED 3 pumps.

To restart a cold engine i.e after the engine has started and run for just a short

time, you will only need to pump the priming bulb (22) once.

DO NOT EXCEED 2 pumps.

To restart a hot engine, you will not need to pump the priming bulb (22) at all.

NOTE: If you over pump the engine, it will not start.

DO NOT re-pump the engine priming bulb (22).

Continue to pull the recoil starter (16) and after a number of pulls the engine

will start.

AFTER SALES SUPPORT

1800 909 909

(toll free)

Emergency Stopping

e-mail: [email protected]

MODEL: №. 50620