Galaxy Audio JACKS in the BOX JIB/BT5R Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Приймач Galaxy Audio JACKS in the BOX JIB/BT5R. Galaxy Audio JACKS in the BOX JIB/BT5R 8 сторінок. Portable wireless xlr bluetooth 5 recevier
Друкувати сторінку
Receiver Setup
1. Pair Your Receiver:
Before connecting the receiver to equipment, it is easiest to go through the pairing process first. If Stereo-Linking two
receivers, link the receivers together first as well.
2. Connecting To Equipment:
Plug into any active speaker, amp, or mixer that has XLR Input connections.
NOTE: You can connect to most mixers, amplifiers or other devices that accept line-level inputs.
3. Power:
Make sure the receiver is charged before each use. Alternatively, you can plug the receiver into a power source using
the included micro USB cable for continuous power while in use.
4. Adjusting Levels:
Volume can be controlled with the Bluetooth enabled device, most active speakers, amps, and mixers.
NOTE: It is recommended to adjust the volume of devices in the following order:
1. Adjust the Bluetooth
2. If using a mixer, first adjust the input channel levels and then its main output level.
3. The active Speaker/Amp should be the last volume adjustment.
5. PAD Switch:
When plugged into Mic level input, the pad switch can be engaged for appropriate sensitivities. Lowering the input
signal sensitivity can help to avoid signal overload and distortions.
5
Receiver Setup
®
enabled device volume higher.
®