Galaxy Audio JACKS in the BOX JIB/BT8R Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Приймач Galaxy Audio JACKS in the BOX JIB/BT8R. Galaxy Audio JACKS in the BOX JIB/BT8R 8 сторінок. Stereo bluetooth receiver
Друкувати сторінку
System Setup
Connecting Cables From JIB/BTSR Receiver Outputs
1. Connecting XLR Cables:
Plug XLR cables to the XLR balanced UR outputs on the JIB/BT8R. Connect the other ends of the XLR cables to the
XLR R/L inputs of a mixer, active speaker, or amp.
2. Connecting 1/4" (6.35mm) Cables:
Plug 1/4" (6.35mm) cables to the 1/4" balanced UR outputs on the JIB/BT8R. Connect the other ends of the 1/4" cables
to the 1/4" R/L inputs of a mixer, active speaker, or amp.
Final Setup Connections
1. Antenna:
Attach the antenna into ANT connector.
2. Power:
Connect the included power adapter to connect JIB/BT8R 5V DC/1A input. Connect the other end to your power source.
3. Pair:
Pair the receiver with a Bluetooth® device.
Optional Stand Mounting Setup
1. Stand Adapter:
T he included adapter allows for 3/8"-5/8" stand options. To remove the adapter 5/8" size, unscrew counter-clockwise.
To insert for 5/8" size or to tighten, screw in clockwise.
2. Stand Mounting:
To screw the receiver onto the stand, rotate the receiver clockwise until secure.
Receiver Setup
4