iHealth BP3 Посібник з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Монітор артеріального тиску iHealth BP3. iHealth BP3 11 сторінок. Fully automatic arm cuff electronic blood pressure dock
Також для iHealth BP3: Посібник користувача (12 сторінок), Посібник із швидкого старту (2 сторінок)

Друкувати сторінку

STEP 1: Place your iPod touch, iPhone or iPad onto the iHealth Dock

STEP 2: Select and launch the App

STEP 3: Application should now recognize the iHealth Dock and display the battery

capacity

3.CHARGING AND USING THE BATTERY

1) When need charge, please connect to power source for charging the battery. The

Dock can work normally when charging.

2) When connect the BP3 with iPod touch, iPhone, or iPad, the battery volume will be

displayed on the iPod touch, iPhone, or iPad screen. If it is less than 20%, please charge

the battery. The Dock will not work until the battery has enough power.

3) When you charge the Dock, the LED will display with diﬀerent colors to indicating

the charging status. See the table below for details.

4) Please do not overcharge or over discharge the battery, which may reduce its

lifetime. It is suggested that you charge the battery once the battery is less than 25%,

and when the battery is fully charged, please disconnect the adapter in time.

The Dock, the cable, the battery and the cuﬀ must be disposed of

according to local regulations at the end of their usage.

Note:Battery has limited charge cycles and may eventually need to replaced by

iHealth service provider. Battery life and charge cycles vary by use and settings.

LED Status

Charging

Fully charged

Without external power

Low battery indicator

(for a few seconds)

Abnormal state

iPod touch, iPhone, and

iPad connected

Green LED twinkling

Green LED light on

Red LED twinkling

Red LED light on

iPod touch, iPhone, and

iPad unconnected

Yellow LED twinkling

Green LED "pulsing"

LED extinguished