iHealth BP5 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Монітор артеріального тиску iHealth BP5. iHealth BP5 17 сторінок. Wireless blood pressure monitor
Також для iHealth BP5: Посібник із швидкого старту (4 сторінок), Посібник користувача (13 сторінок), Посібник із швидкого старту (5 сторінок)

iHealth BP5 Посібник користувача
Connect to iOS Device via Bluetooth
Apply the cuff or press the START/STOP button, the Bluetooth indicator
will begin flashing.
• Turn Bluetooth "On" under the "Settings" menu on the iOS device.
• Wait until the model name printed on the monitor, (i.e. "BP5 xxxxxx") and
"Not Paired" appear in the Bluetooth menu, and select the model name "BP5
xxxxxx" to pair and connect. The Bluetooth indicator will remain steady
upon successful connection. When using the monitor for the first time,
it may take up to 30 seconds for your iOS device to detect the Bluetooth
signal.
• Each subsequent time you use the monitor, "Not Connected" will be displayed
next to "BP5 xxxxxx" in the Bluetooth Menu.
• Please repeat these steps when you switch to another iOS device with the
monitor.
Monitor Status
Waiting to connect
Connected and measuring
Measurement completed and ready to
disconnect

MEASUREMENT PROCEDURES

Blood pressure can be affected by the position of the cuff and your
physiologic condition. It is very important that the cuff should be
placed at the same level as your heart.
Body Posture
Sitting Comfortably During Measurement
a. Be seated with your feet flat on the floor without crossing your
legs.
b. Place your hand, palm-side up, in front of you on a flat surface
such as a desk or a table.
c. The middle of the cuff should be at the level of the right atrium
of your heart.
Bluetooth Indicator
Flashing blue light
Steady blue light
Gradually extinguishing light
4