High Lifter YLKWOLVX4-51 Інструкція з монтажу Посібник з монтажу - Сторінка 6

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Автомобільні аксесуари High Lifter YLKWOLVX4-51. High Lifter YLKWOLVX4-51 12 сторінок. Yamaha wolverine 850 x2/x4

Друкувати сторінку

1. Place jack under the center of the UTV, just forward of where the rear drive shaft connects to the engine,

and lift until the weight is off the suspension. Be careful to secure the UTV properly so it is stable on the

jack.

2. Remove the rear wheels.

3. Starting on the right side, disconnect the top of the shock from the UTV.

4. Place the rear lift bracket (81J-L) to the outside of the outer shock tab. The lower portion of the bracket

will come to rest to the inside of the lower portion of the frame.

5. Slide a (12mm x 80mm bolt) through the top hole of the lift bracket and through the outer shock mount

tab.

REAR LIFT INSTALLATION