Dynascan PMR446 Інструкція з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Трансивер Dynascan PMR446. Dynascan PMR446 11 сторінок. Handheld transceiver
Також для Dynascan PMR446: Інструкція з експлуатації (16 сторінок), Інструкція з експлуатації (10 сторінок)

Dynascan PMR446 Інструкція з експлуатації
iv.

TRANSMIT:

Press and hold the [PTT] key and talk in the direction of the radio microphone in a normal voice tone. The LED
indicator will be illuminated in a red colour. Release the [PTT] to receive.

8. SHORTCUT MENU OPERATION:

Follow this procedure to program the side key to operate one of the following functions:
Note:
-
When the [
] key is pressed briefly, "PF" will display on the screen. "PF" is not a function, but a method
to access another function. Press the [

9. ADVANCED OPERATION:

i.

FM RADIO:

When the side key is defined as the FM radio function, press the side key to enter in FM radio mode and the LCD
screen will show
.
Exiting the FM radio: When in FM radio mode, press the side key again to exit.
Scanning FM radio: When in FM radio mode, press this key to scan the FM radio stations. An orange indicator
will flash and the radio will stop scanning when an effective FM radio station is detected. In FM radio mode, the
radio also monitors the signals. When there is no signal being received, the radio will exit FM radio mode and
return to transceiver mode for communication. If there is no signal or operation performed after 5 seconds, the
radio will return to FM radio mode.
] key twice to access the functions of the side key.
8