high pointe M-ID185 Посібник користувача - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник користувача для Варильна поверхня high pointe M-ID185. high pointe M-ID185 16 сторінок. Induction
Друкувати сторінку
TROUBLE SHOOTING
Abnormalities
Plug the power cord and press the "ON/OFF" key,
but the indicator and display do not light up.
The "ON/OFF" indicator lights up and the display
works normally, but heating does not start.
Heating suddenly stops during the process.
E1
E2
E3
E4
E5
E6
code of failure
E7
E8
EA
EB
EC
Voltage range:
Instruction
Low voltage protection:80± 10V
High voltage protection:140± 10V High voltage recovery: 130± 10V
Emergency
During use if there are some abnormal cases, please unplug immediately and
disconnect power.
The main sensor is open circuit. If keep abnormal, please take the appliance to a repairing
and maintenance site to be fixed.
The main sensor is short circuit. If keep abnormal, please take the appliance to a repairing and
maintenance site to be fixed.
The main sensor is hot. Is the ceramic plate hot ? If it
If keep abnormal, please take the appliance to a repairing and maintenance site to be fixed.
The IGBT sensor is open circuit. If keep abnormal, please take the appliance to a repairing and
maintenance site to be fixed.
The IGBT sensor is short circuit. If keep abnormal, please take the appliance to a repairing and
maintenance site to be fixed.
The IGBT sensor is hot. Is the heat dissipation poor? If it is, while it is cool it will recover normal.
If keep abnormal, please take the appliance to a repairing and maintenance site to be fixed.
The voltage is lower, check the voltage. If keep abnormal, please take the appliance to a
repairing and maintenance site to be fixed.
The voltage is higher, check the voltage. If keep abnormal, please take the appliance to a
repairing and maintenance site to be fixed.
Dry burning protect, check it. If keep abnormal, please take the appliance to a repairing and
maintenance site to be fixed.
The main sensor is invalid. If keep abnormal, please take the appliance to a repairing and
maintenance site to be fixed.
The fan is abnormal. If keep abnormal, please take the appliance to a repairing and maintenance
site to be fixed.
Key checking points and trouble shooting
* Is the power plug properly connected?
* Is the switch, power outlet, fuse or power cord
damaged?
* Is the cookware compatible. Refer to page 13.
* For other causes, please take the appliance to a
repairing and maintenance site to be fixed.
* Is the temperature of the oil too high when frying dishes?
* Is the temperature of the surroundings very high?
* Is the air inlet or air outlet of the induction cooker blocked?
* Is the default heating time of the induction cooker over?
* The self-safety protection of the induction cooker starts, wait
for several minutes and connect power to use it.
is, wh
ile it is cool it will recover normal.
Low voltage recovery: 90± 10V
,
,
14