Autool X90 Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Вимірювальні прилади Autool X90. Autool X90 13 сторінок. Smart gps slope meter
Також для Autool X90: Посібник (4 сторінок)
Друкувати сторінку
6. Introduction of Key Function
1) "M" function key
* Short press "M" function key, temperature unit / switching
* Long press "M" function key 3S, speed unit KM/H and M PH switch.
* Long press "M" function key 5S, turn on/off sound
2) Right-click
* Press the "right button" button to reset the roll angle and elevation angle.
* Press the right button for 5 seconds to clear the car trouble code.
7. Installation Steps
1) Park the car on the horizontal road, paste the back glue on the product, fix it anywhere
convenient to observe inside the car, and adjust it manually to the level.
2) Connect the OBD data line to the OBD interface of the automobile (as shown in the figure
below). The OBD smart convoy will start until the data are displayed properly.
8. Warranty
There are 3 years' warranty for AUTOOL product main unit and 1 year warranty for the
accessories since the day the customers have received the product parcel.
Warranty Access:
1.Repairing or replacement the equipment will be done according to the specific fault
conditions.
2.We guarantee that all replacement parts, accessories or equipment are brand new.
3.When there is a product breakdown that can not be solved within 90 days, customer
should provide video and pictures as proof, we will bear the freight cost and provide
customer the accessories in need to replace. After receiving the product for more than
90 days, the customer shall bear the freight cost, we will provide the accessory for free
to replace.
Conditions Warranty not Covered:
1.Product is bought through non-official AUTOOL purchase channel.