Autopage C3 Посібник з монтажу - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з монтажу для Автосигналізація Autopage C3. Autopage C3 8 сторінок. Telematics and tracking module
Також для Autopage C3: Посібник з експлуатації (16 сторінок)
Друкувати сторінкуcomplete tracking capabilities via any internet connected computer or
cell phone, anywhere in the world. The system is based on a proprietary
two-way digital communications protocol that allows complete encrypted
communication between the security and remote start system, data
modules and the vehicle. The unit utilizes the latest Siemens
telecommunications module as an engine for the interface which drives
the cellular communication and GPS functionality. In this manner the
user can control many aspects for the vehicle as well as complete full
featured tracking capabilities with an icon based user interface. The
system can in many ways eliminate the need to carry hand held remote
controls allowing unlimited range for complete operation and a total
solution for the control and tracking of the vehicle.
Precautions:
The C|3 system uses the cellular network for communication.
Outages of the cellular system can occur from time to time. It is
highly recommended that a remote still be accessible for the
operation of the vehicle in case a cellular system outage occurs.
The C|3 will operate anywhere covered by the cellular system.
In some remote areas there will be no cellular coverage for the
system to operate. This can depend on the carrier, terrain and
environmental factors that can interfere with normal cell phone
operation.
It is highly recommended that a data and text message plan be
purchased for the phones controlling the C|3 in your vehicle or
vehicles. This will prevent additional billing from your cell phone
provider. The C|3 uses compact data bursts that are typically
very small in size however these could add up.
This unit as well as the user's cell phone MUST be programmed
before they will operate. Please see dealer and user
programming contained in this manual.
To prevent accidental activation, only connect power to this